ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
ph1 hid fitment guide?? got one?
- Thread starter BoomOne
- Start date
Artic Blue 182 FF
Most HID kits just plug into the OEM light loom in the engine bay using spade connectors.
Might want to check the fuses' as well, as they commonly blow when installing hid kits.
Got any pics of the actual kit setup, might be more of a help/
Might want to check the fuses' as well, as they commonly blow when installing hid kits.
Got any pics of the actual kit setup, might be more of a help/
Mk2 1.2 Campus
Yeah as above, simple enough, just unplug the wiring from the bulb, take the old bulb out and plug in the kit one side at a time and shouldn't have any problems
Mk2 1.2 Campus
You have 2 extra plugs from what I remember, I don't have that small black box
Mk2 1.2 Campus
The drilling is only needed if you want to mount the ballasts to the car using brackets and bolt them on
PH1 172 Sport
Some cars need headlight bulbs sensor when fitting HID's IIRC and I think that is waht the black box is which you will not need on the clio so put that to one side.
To start remove the stock bulb and very carefully fit the HID bulb.
On your picture the connector lying next to the bulb (look like it has orange on it) will connect to the connctor that is pluggerd into you stock bulb.
The connector at the very bootm of your picture connects directly to the corrosponding hole on the silver box.
The remaining two rounds connectors that are on the bulbs loom connect to the corrosponding plugs on the end of the loom coming from the silver box.
Hope that makes sense
To start remove the stock bulb and very carefully fit the HID bulb.
On your picture the connector lying next to the bulb (look like it has orange on it) will connect to the connctor that is pluggerd into you stock bulb.
The connector at the very bootm of your picture connects directly to the corrosponding hole on the silver box.
The remaining two rounds connectors that are on the bulbs loom connect to the corrosponding plugs on the end of the loom coming from the silver box.
Hope that makes sense
