Pi Lowering Springs

[Padso]

Has anyone got any pictures of their clios lowered using Pi lowering springs?

 

[KTR-CLIO]

Heres my Clio on 40mm Pi springs

http://www.pbase.com/gadgetboytom55/riks_carhttp://www.pbase.com/gadgetboytom55/riks_car

 

[maff]

looks good! while i was at powerflow today they said the PI lowering springs, would only lower 15mm and would cost me £150. So i didnt get them. How much were yours? looks like yours are definately more than 15mm!

 

[KTR-CLIO]

I got mine from someone second hand. But they are Front -35mm Back -40mm.

Rik

 

[Rich P]

Have u tryed R-tec? I got 35mm pi springs for the front and had my torsion bar adjusted at the back the same for £200

 

[Steviebhoy]

Ive got PI lowering springs on my Clio dropped it 40mm. Cost £86 for springs & £80 to be fitted. Not got any pics just now sorry. That was through Auto Image in Glasgow.

 

[Fred@BTM]

£80 to have em fitted!!!!! bloody hell!!!! I do it for £40

 

[ClioJohn]

yeah but fred hes paying for a professional, dont want you dirty amateur hands on it eh

hehe

 

[hon_n_gem]

ok, ive just brought a 35mm PI lowering kit from shop.potn.co.uk and they cost me £85 or so. Thing is, it has 4 springs!!! Now im a bit lame when it comes to exterior knowledge, but should this be right??It said on the website...-35mm drop on Clio 98-

They are labelled front and rear, but the rear ones are considerably smaller than the front ones. Is this the right kit or have the Ar$eholes sent me the wrong kit!! Thanks

 

[Fred@BTM]

if your clio is 1998 + it should have two smaller springs (for the rear), and two longer springs(front)

Who you calling amatuer???? he paid £20 a corner, thats a total of £80 to undo 10nuts(and put them back on)!!!!!

The rear suspension is held on by 2 nuts for god sake!!!(1 nut each side)

The front is held on by 6 (3 each side)

then theres 2 wee nuts (no jokes) holding the front springs compressed (1 each side)

 

[hon_n_gem]

fred, so do u still have to adjust the torsion bar?? Where abouts are u mate? U seem like u know what ur doin, ill pay u to do mine if u local enough

 

[Fred@BTM]

If its a 1998+ car, then there is no Torsion BAR, 1998+ clios have rear trailing 1 piece torsion BEAMS with rear springs

In other words if you clio is 1998 onwards it doesnt have a torsion bar

Gengar, Im in Birmingham