Pipe missing

[Silver pockets]

Can anyone tell me where the pipe from inlet manifold goes it's just under the coil. At the moment there is no pipe just a steel elbow that's sucking in air what is missing ??

 

[Pauleds]

Shouldn't be sucking, it's a breather, should be a pipe going to the airbox

 

[tom172w]

Rubber hose connects that to the elbow pipe on your actual intake piping, if that makes sense

 

[tom172w]

http://www.detailingworld.co.uk/forum/showthread.php?t=267096

Follow that link, I think the 8th pic down shows his induction kit, on the elbow piping coming off the throttle body you can see the little elbow pipe that it should be connected to

 

[STEVE.M]

Can anyone tell me where the pipe from inlet manifold goes it's just under the coil. At the moment there is no pipe just a steel elbow that's sucking in air what is missing ??

I suspect you are refering to the vacuum take off point for the accoustic valve.
Either the pipe has fallen off/not been reconnected,or it`s a botched removal.
If the former,have a fish around for it,and if the latter cap it with Kawasaki vacuum guage take off cap 92068 006.
Off the top my head,I think that`s the correct part number.

 

[tom172w]

I'm pretty sure he's referring to the oil breather plate elbow - it's round the back of the engine, as he says basically under the coil pack.. As stated a pipe should run from that elbow to the intake piping elbow.

 

[Silver pockets]

Thank you people, it is blowing I got it wrong, breather pipe it is, as it has induction kit on. So all I need is a pipe off that to the plastic elbow on the intake pipe near throttle body ?

 

[STEVE.M]

Thank you people, it is blowing I got it wrong, breather pipe it is, as it has induction kit on. So all I need is a pipe off that to the plastic elbow on the intake pipe near throttle body ?

No wonder women dont understand men.Do you mean suck or blow?

 

[tom172w]

Thank you people, it is blowing I got it wrong, breather pipe it is, as it has induction kit on. So all I need is a pipe off that to the plastic elbow on the intake pipe near throttle body ?

Yes

 

[STEVE.M]

Thank you people, it is blowing I got it wrong, breather pipe it is, as it has induction kit on. So all I need is a pipe off that to the plastic elbow on the intake pipe near throttle body ?

Some not very good pics to tidy this one up.They were meant to be thumb nails,but there you go.
The pipe at the front on the manifold is to the acoustic valve,the one at the rear with the clip is to the servo,and the one on the intake elbow is a breather.