ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

R27 LED



IMG_5566.jpg


IMG_5538.jpg


IMG_5542.jpg


IMG_5548.jpg


IMG_5551.jpg


IMG_5554.jpg


IMG_5559.jpg


IMG_5569.jpg


IMG_5570.jpg


IMG_5573.jpg


IMG_5578.jpg


IMG_5579.jpg


IMG_5583.jpg


IMG_5589.jpg


IMG_5535.jpg
 
There are 9 LEDS in the roof liner and 2 on the door plus 2 behind the sunvisors.

1wled85.jpg


1wled88.jpg


Search
2pcs 501 W5W High Power LED (Blue) Dash wedge Bulbs




s.gif
 
  audi a6 3.0tdi
It reminds me of maxpower back in the year 2000 when everyone had those crazy neons inside their cars.
 
pmsl

did the make them much brighter in the lights at the back

If you are asking if the Brake/side lights are brighter, I would say a little, certainly not dimmer, being LED they do come on faster than standard filiment bulbs.
I have put Red LED behind the red reflector as you are supoosed to do something to do with the way light travels.
The Ultra white reversing lights are very bright.
The fogs are as bright as the brake lights when braking.
 
Out of interest, have you had to put in resistor packs for the rear lights?

When I upgraded my standard bulbs to LED ones, the car didn't understand the lack of resistance and so would not allow them to work (presumed no bulb was present).

Jamie
 
Out of interest, have you had to put in resistor packs for the rear lights?

When I upgraded my standard bulbs to LED ones, the car didn't understand the lack of resistance and so would not allow them to work (presumed no bulb was present).

Jamie

These LEDS are fine, all lights working, maybe these are better quality with resistor packs built in.
Only problem was the hyper ticker on the amber indicator LEDS but I can buy a flasher relay for that, although I like the silvertec bulbs for that application.
 
These LEDS are fine, all lights working, maybe these are better quality with resistor packs built in.
Only problem was the hyper ticker on the amber indicator LEDS but I can buy a flasher relay for that, although I like the silvertec bulbs for that application.

Yeah that is the issue with LEDs on cars that come with standard filament bulbs. The side lights/repeater lights should be no problem, but all other indicators will presume that there is no bulb present, meaning they will flash quickly, just like when a bulb has blown.

The flasher resistors are awful (such has been my experience anyway) as they heat up to around plastic melting temperatures!!!!

Jamie
 
Yeah that is the issue with LEDs on cars that come with standard filament bulbs. The side lights/repeater lights should be no problem, but all other indicators will presume that there is no bulb present, meaning they will flash quickly, just like when a bulb has blown.

The flasher resistors are awful (such has been my experience anyway) as they heat up to around plastic melting temperatures!!!!

Jamie
Hi Jamie,
yep, I won't go down the flasher resistor route, all other lights are ok though.
 
  Monaco 172 + mk1 RSi
looks awsome wher do i get them ?

and i want one for my reg plate light quick, mines dead and LED is the future lol

jamie
 


Top