ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Rear fog light when braking
- Thread starter JR1.4
- Start date
182 & LY Clio 220 ed
Its because the connection earths through the foglight.
Check the terminals (there should normally be some form of corrosion on them) then remove it with nail file, dremel, etc. all should be fine.
Its the crap design of the light clusters that allows water in there. Some people reckon to use wd-40...but I haven't, I just use the demel on the plug and also the connection. That should sort it out.
You will notice it more if you turn braking whilst your indicator is on, the fog light will really blink depending on how corroded the connections are.
Check the terminals (there should normally be some form of corrosion on them) then remove it with nail file, dremel, etc. all should be fine.
Its the crap design of the light clusters that allows water in there. Some people reckon to use wd-40...but I haven't, I just use the demel on the plug and also the connection. That should sort it out.
You will notice it more if you turn braking whilst your indicator is on, the fog light will really blink depending on how corroded the connections are.
MK2 PH1 1.2
mine does this too... but only the dash light. the fog light itsself doesnt come on or flas when the indicators are on. Also, that only happens when i indicate right.
182 & LY Clio 220 ed
Check the connections to the rear light on the right hand side. Then what I've said in the post above should suffice.
MK2 PH1 1.2
i checked the connections and they looked fine to me... would u suggest just spraying a little wd40 in the connections?
Ph1 track 172
mine did this too,
i just wiggle the coonection,
and it stops for about 3months,
mine did the dash fog light,
and indicator right,
and the lil trip clock dimmed asif you'd turned the side lights on
err..
and if you opened the door with the hazards on, it wud beep asif youd left your lights on,
and if you indicated right with the brake on, the two lights wud flash
(brake light inbetween flashes of the indicator)
rather annoying
i just wiggle the coonection,
and it stops for about 3months,
mine did the dash fog light,
and indicator right,
and the lil trip clock dimmed asif you'd turned the side lights on
err..
and if you opened the door with the hazards on, it wud beep asif youd left your lights on,
and if you indicated right with the brake on, the two lights wud flash
(brake light inbetween flashes of the indicator)
rather annoying
Check them again, make sure there is no play in the connection.
MK2 PH1 1.2
no play?
it all looks normall under the bulbs... jus looks like it could benefit from a little wd40 tbh lol
182 & LY Clio 220 ed
Both sides????
Just get a nail file or sandpaper and run it over each one of the prong (connections), then see if it happens.
MK2 PH1 1.2
Both sides????
Just get a nail file or sandpaper and run it over each one of the prong (connections), then see if it happens.
Ahh okay mate, i will do... then a little wd40?
182 & LY Clio 220 ed
Both sides????
Just get a nail file or sandpaper and run it over each one of the prong (connections), then see if it happens.
Ahh okay mate, i will do... then a little wd40?
Some people use it...I'm not a fan...but as you see fit.
I haven't used it on mine, but the issue does recurr every so often.
Similar threads
