Removing mk2 ph2 bumpstrips

[Middo]

what the knack to removing these. i've seen the two screwdriver lugs on the underside but still cant figure out how to remove them.

do i have to pull towards the end of the door (i.e. door strip back, and rear quarter strip forwards?)

Mark

 

[The Big Yin]

do i have to pull towards the end of the door (i.e. door strip back, and rear quarter strip forwards?)

Mark

Yep!!!

 

[Craig Ed]

And if your gonna remove the back bumper strip like i just have, then a cloth with a flat head screwdriver in the corner and above the lugs it just pops out 1 by 1.

^^ If that any use

 

[richard691]

Where are the lugs on the side bump strips because i tried just sliding the strips but nothing happened?

Also how do you get the front strip out?

 

[Pep]

gonna resurect this, im having trouble removing the 3/4 bump strips, can anyone give me any advice on getting them off?!

 

[JD]

you need to pull them towards the door mate, ie front of the car.

if your having trouble, try lifting the edge closest to the door up a little bit, as there is a lug that sits in a hole to stop them just sliding forwards whenever.

 

[A18XHO]

for the long 1's, pull your badges off the with a rubber mallet 1 nock with push it back by hitting it on the stick out bit. Rear just push it towards the car with your hand and hit it towards the front with a rubber hammer letting it just grip the plastic and they just come off

 

[Pep]

cheers for the info, managed to get them off just after i put a post up in here!

killed my fingers though!