Replacing Washer Jets?

[Sunglasses_Ron]

Changed mine yesterday. Awesome little modification!

 

[T12]

Mine arrived today and they came with these little plastic thingy's shown in the picture below:

Are they used when fitting onto the clio?

 

[Simon_16v]

Yeah you can use them @T12

 

[fairm010]

I didn't get those with mine and they work fine without.

 

[T12]

Thanks gents, I think I'll test fit one with it and one without and see which sits nicest. Next job is to get the bloomin' wipers off (been told its a pain), so I can fit a new motor for the washer jets.

 

[Amos91]

Thanks gents, I think I'll test fit one with it and one without and see which sits nicest. Next job is to get the bloomin' wipers off (been told its a pain), so I can fit a new motor for the washer jets.

Wipers are a doddle with this:

http://www.halfords.com/motoring-travel/tools-diy/tools-tool-kits/laser-ball-joint-separator-cup

 

[Gus]

Changed mine yesterday. Awesome little modification!

How do you get the old nozzles off. had a quick go but couldnt figure it out.

 

[JamesBryan]

How do you get the old nozzles off. had a quick go but couldnt figure it out.

Pull the tubing off, needs a good pull.

Then push the washer from underneath. I used a little socket on an extension bar to help.

 

[Gus]

Pull the tubing off, needs a good pull.

Then push the washer from underneath. I used a little socket on an extension bar to help.

Thanks mate, the tubing was really stretching so was worried it would split, will give it another go.:up:

 

[JamesBryan]

Thanks mate, the tubing was really stretching so was worried it would split, will give it another go.:up:

Yeah mine stretched a fair bit too, just grab as close to the hole as possible and pull steadily.

 

[Sunglasses_Ron]

How do you get the old nozzles off. had a quick go but couldnt figure it out.

Yeah as said just grip it as close to the jet as possible and pull

 

[Mattface]

Mine got ripped off in a safari park yesterday (b*****d monkeys) I've got a mk3, will these Citroen jets still fit? Or are the mk2 and mk3 different in this regard?

 

[chris blue]

anyone got an update/ link for decent washer jets for the 172
Or is it try any ole ebay ones?

 

[DomP182]

Pardon our interruption...