Sensors on Valver

[donsrno1]

I went to see a clio 16v last week but noticed that it had two sensors (cts and temp sensor for dash gauge) without any connectors going to them. I have since found out though that these are infact on the thermostat housing on the clio. The pic below shows the two sensors I mean (circled in red).

Does anyone know if any clios came with this et up as standard?

I've been told by a few people that this set-up was only on the 19 16v engine, just want to check as if it wasn't standard on any clios it means the car I'm looking at has had an engine/head swap at some point in it's life.

Also, does anyone know of any sensors which could be around the area of the yellow circle?

Thanks.

 

[u33db]

If there are no connectors going to the sensors then either the loom has been butchered or its the wrong loom or they're hanging off.

 

[donsrno1]

If there are no connectors going to the sensors then either the loom has been butchered or its the wrong loom or they're hanging off.

Thats what I thought at first mate, but I've been on williamsclio and a few people have cleared that up as it sounds as though the car has a 19 16v head on it with the clio 16v themrostat housing so the CTS etc are actually in the thermostat housing, meaning the other ones need not be connected.

I just want to check if any clio's have the sensors there as standard or if the car definately has a 19 16v head on it.