Skoda Splitter

[JaredHasNoBrain]

Just bought a Skoda front splitter, wondering what is the BEST way to put it on?
Do I have to mod the splitter in anyway at all or will it just bolt straight on.

Looked on guides and couldn't see anything, Any help will be great

 

[rollerdan]

Have to cut one end as its a bit long . I used self tappers for mine

 

[JaredHasNoBrain]

Have to cut one end as its a bit long . I used self tappers for mine

f**k me that was Quick!
Awesome, Thanks.

 

[wilyoldave]

Using a stanly knife cut the top of the lugs off so it will sit flat against the underside of your bumper.

then mark middle of the splitter and the middle of the bumper and then work your way from the middle out - i would self tapper every other lug.

When you get to the ends just trim the excess off with a sharp knife - you can even cut the end bit of then glue it back onto the newly fitted splitter to finish it off (if that makes sense!)

Put some pics up when you have done it.

 

[JaredHasNoBrain]

Using a stanly knife cut the top of the lugs off so it will sit flat against the underside of your bumper.

then mark middle of the splitter and the middle of the bumper and then work your way from the middle out - i would self tapper every other lug.

When you get to the ends just trim the excess off with a sharp knife - you can even cut the end bit of then glue it back onto the newly fitted splitter to finish it off (if that makes sense!)

Put some pics up when you have done it.

Thank you Will be putting them up when its arrived lol

 

[Mutley172]

Picked up my new splitter today what size self tapers did you use ? Also polished up headlights today can not believe difference it makes to look chuffed as nuts

 

[JaredHasNoBrain]

Picked up my new splitter today what size self tapers did you use ? Also polished up headlights today can not believe difference it makes to look chuffed as nuts

Mine aint come yet, but will be using ones like these:
http://www.a2stainless.co.uk/4-x-3-8-Pozi-Pan-self-tapping-screw-AB-DIN7981-A2_A10DH7.aspx

 

[jjames]

http://compare.ebay.co.uk/like/2908...ixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

glue it on with this, it will never fall off, we use it to hold spoilers on.

 

[dubby]

I used self tappers last time on my old car but may glue it now, never thought of that, good idea!

 

[Mutley172]

Many thanks for advice guys cheers

 

[JaredHasNoBrain]

My mate tried to use it when he put on a body kit LOL, biggest mess I've ever seen,
I'll be using tappers will look neater and won't budge it scraping the floor

 

[coleman]

Self tapping screws are what i used fitting my one, had to trim off about 4" on one side, but for £12 i was more than happy!

Next up, shift them leggera's on and get a set of turini's on.

 

[JaredHasNoBrain]

Self tapping screws are what i used fitting my one, had to trim off about 4" on one side, but for £12 i was more than happy!

Next up, shift them leggera's on and get a set of turini's on.

Should be easy enough lol!
Turini's are expensive and everyone's got them Leggera's FTW.

 

[JaredHasNoBrain]

Splitter just came, So as soon as my bumper is back from the body shop (cheeky) Will be putting this on
and my car is in the garage getting the front lowered

 

[LeeLappage]

Mine aint come yet, but will be using ones like these:
http://www.a2stainless.co.uk/4-x-3-8-Pozi-Pan-self-tapping-screw-AB-DIN7981-A2_A10DH7.aspx

How many do you think you'd need to fit the skoda splitter?

 

[JaredHasNoBrain]

How many do you think you'd need to fit the skoda splitter?

Probably about 4 just to be sure.

 

[JaredHasNoBrain]

Finally fitted it:
Before

After:

Cant really see it under shade but yeh

 

[lee922]

did mine today, quick question, the center is market on the splitter by a smaller tab... why would you cut 4 inch off one end...

But looks a lot better now it is done.., by the way i used 24 self tapping screw but could have used 10 -14 lo

 

[JaredHasNoBrain]

I didnt cut 4 inch off one end, I centered the splitter screwed that in, then worked outwards.
So when I came to the ends it was a little hanging over the end and just cut that part off.

Anyone know what size screws/bolts you use to put on the Foglights?

 

[LeeLappage]

Finally fitted mine the other day! :rasp:

http://www.cliosport.net/forum/showthread.php?692188-A-Campus-With-a-Splitter!-(Finally)

 

[Anth_172]

Has any1 got the vag part number for these?

 

[Matt e]

5J0 807 061 9B9

 

[Anth_172]

Spot on thanks al give tps a bell tomorrow

 

[cjewkes]

After my cup splitter got destroyed by a mound of snow , I now have my Skoda Splitter to fit to the front of mine. Looks a simple job to fit.

 

[Renault Wolverhampton]

i did the same but theres no way im putting one of those on

 

[JaredHasNoBrain]

i did the same but theres no way im putting one of those on

why.

 

[Filippo]

I've currently got a cracked carbon fibre ktec splitter on. Can't decide whether to leave it, replace it with a Skoda or bite the bullet and get a new ktec at about £90.

​That last option is just ridiculous though.

 

[Canary172]

I've currently got a cracked carbon fibre ktec splitter on. Can't decide whether to leave it, replace it with a Skoda or bite the bullet and get a new ktec at about £90.

​That last option is just ridiculous though.

Do KTEC have access to the moulds for the carbon splitters? If so, then it's possible to repair the damage rather than laminating a completely new one.

 

[Filippo]

Do KTEC have access to the moulds for the carbon splitters? If so, then it's possible to repair the damage rather than laminating a completely new one.

No idea mate. They don't tend to do much on the cheap though

 

[Filippo]

You know what - my girlfriends dad used to run a fibreglass factory. If he could mould a fibre splitter would anybody be interested? And what price would you pay? Ill see him tomorrow so can see what he could do.

 

[scaryopa]

that could be a nice option, depending on price obvs, i have a ktec splitter and i have a feeling when i lower the car i will smash it within the first week, but dont want a skoda splitter, but i refuse to buy another carbon one at the price they are so long as there cheaper than ktec im sure some people will be interested.

 

[Thomaspaddock]

i wouldnt mind a look in, if you could get some pics up first of all, if that possible?