Spinning subframe bolts

[smac4494]

Just a quicky. The rear 18mm subframe bolts are spinning on my mk2 ph1. Can't get enough room for a spanner on the top nut. Any advice that doesn't involve wd40 or impact gun?

I'm about to grind off the bolt heads. Just want to get some alternative ideas

 

[smac4494]

Never mind

 

[Budgie]

Lol!

That's one way to do it!

You breaking the thing? If not, Wut de feck?!

 

[Bluebeard]

What can possibly go wrong??

 

[Fraser.J.]

You can get in to the other wise with a spanner

 

[dci172]

Wouldn't have been my first choice

 

[Le Baguette]

I had to do a double take to make sure that picture wasn't OP.

Oh lord...

 

[smac4494]

Ha yes! Definitely breaking it. The top was rounded on one side and the metal/cheese clip holding it was wrapped around it.

 

[Budgie]

Why you bothering taking the subframe off a breaker?

Take the engine and box out of the top, leave the subframe in place!

 

[Bluebeard]

Why you bothering taking the subframe off a breaker?

Take the engine and box out of the top, leave the subframe in place!

This. It's not worth a w**k and it renders the car immobile.

 

[Budgie]

Bingo.

And you'll more than likely do your back in trying to move the c**t!

 

[bloke]

why didn't you just cut the head off the bolt?

 

[levaz]

I use a spark plug socket and ring spanner on these.
Works everytime

 

[smac4494]

It was spinning and the top nut was rounded. And the rear end is undrivable anyways

 

[smac4494]

And I need the subframe to sell. Couldn't get a cutter in at the right angle