ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Split CV boot DIY repair



So I've somehow managed to put the tiniest of splits into the NSF CV boot when fitting a set of billys to the Octavia. I mean its a couple of mm wide and just about pierced the boot, so I've just been out and bought a puncture repair kit from Evans cycles to bang over it.

Anyone tried this before, will it work?

Also is a patch on a CV boot an MOT fail as that's due in a few weeks as well?
 

Brigsy

ClioSport Club Member
  T.Turbo
Small pin hole will repair fine. Brake cleaner the grease off around the hole so its spotless - A dab of epoxy resin works great or even better is a small piece of rubber superglued or stuck on with epoxy. Done a small pinhole on my Kangoo before cs festival and not seen a drop of grease come out of it even with track use. You cant really see where the repair is unless really looking.
 

JamesBryan

ClioSport Club Member
  Titanium 182
overcome.jpg
 


Top