ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Stainless Wheel Arch Liner Bolts
- Thread starter Mbeau
- Start date
Paul172sport
ClioSport Club Member
Sunflower Ph1
Ash J
ClioSport Club Member
Sunflower Ph1 172
Items below are what I used when replacing arch liner fasteners on my Trophy. Can be seen on my old Trophy project thread (a lot of people messaged me last year asking where I got the fixings from after viewing my thread).
Screws: https://www.accu.co.uk/en/self-tapping-hexalobular-torx-pan-screws/22370-SHPT-No-8-3-4-A4
Washers: https://www.accu.co.uk/en/flat-washers/14681-HYW-M4-12-A4
For the washers, up to you if you want larger than 12mm diameter. For the back they are perfect, on the front you might want slightly larger diameter, say 15-17mm ish or so, otherwise the same specs. I seem to remember I bought a few of each (12mm, 15mm, 17mm) so I could choose.
And I know you haven't asked about these, but if anybody wants new clips/fasteners for the front bumper where it meets the wing, you want these (M6 spec).
Screws: https://www.accu.co.uk/en/self-tapping-hexalobular-torx-pan-screws/22370-SHPT-No-8-3-4-A4
Washers: https://www.accu.co.uk/en/flat-washers/14681-HYW-M4-12-A4
For the washers, up to you if you want larger than 12mm diameter. For the back they are perfect, on the front you might want slightly larger diameter, say 15-17mm ish or so, otherwise the same specs. I seem to remember I bought a few of each (12mm, 15mm, 17mm) so I could choose.
And I know you haven't asked about these, but if anybody wants new clips/fasteners for the front bumper where it meets the wing, you want these (M6 spec).
Mbeau
ClioSport Club Member
Clio 172
Awsome, thank you 👍
