ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Still have a misfire



  Mk1 16v brooklands
Cars still running like a sack of s**t. Eml is still on (solid now) it idles fine but under load starts to misfire, turn it off and start her up again and it idles normal again..

Changed coil pack and leads.. Had it plugge in and the codes were ignition coil 1 and ignition coil 2
 
  275 Trophy
Feel for you mate - been there etc.. It can be expensive changing random parts trying to solve the problem so my advice would be get it to a specialist. I know you're at the other end of the country but the Birchdown lads sorted mine out a treat.
 

Greeny.

ClioSport Club Member
  440i + 182
I had something similar and it ended up being one of the injectors, started playing up under load and eventually just idled on 3.
 
  ph2 172
I had something similar and it ended up being one of the injectors, started playing up under load and eventually just idled on 3.


same here!


unbolt the top part of the inlet,remove the leads (so it doesn't try firing) and then get someone to look down the manifold while you crank it over and see if the injectors are pulsing correctly.
 
  Mk1 16v brooklands
Plugs changed and its much better, not cutting out, but it does judder if you put your foot down in 4th at low revs.
 
  Mk1 16v brooklands
Plugs leads and coil now changed for my spares. Engine light is back on solid runs like a sack of s**t. All the faults say are coil 1 and coil 2 misfire
 


Top