ATS CUP'd Dynamique
is it dangerous to have streched tyres ??
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Streched Tyres ?
- Thread starter Renault_Boy01
- Start date
ATS CUP'd Dynamique
winston ?? anyone ??
I don't think so as all the german boys do it, especially on the dub scene.
Personally I think it looks pants lol but I don't think it's a problem to do it
Personally I think it looks pants lol but I don't think it's a problem to do it
ATS CUP'd Dynamique
okay..how do you know what tyres size to go for to get the streched look ??
Pep
ClioSport Club Member
M2,XJS,S1000RR
wrong mate, a lot of my friends drift, seriously stretched tyres have no problem at 60mph drifts with 300bhp going through them...
ATS CUP'd Dynamique
thats what i was thinking, in drifting they have streched tyres which go through a lot of strain
ATS CUP'd Dynamique
so how do i know what tyre size to go for..
ATS CUP'd Dynamique
so if i had a 6.5jx15" rim what tyres should i use to get the stretched look
ATS CUP'd Dynamique
^^ anyone know
165/45/15 or thinner, some tyre places wont fit stretched tyres
172
How the f**k was that achieved? I want to adjust my camber slightly but not anywhere near as much as that.
Wasn't done on purpose, he has camber shims for a bit of camber but 2 of the bolts gave way at the show.
thats my car!
i can supply you lads the shims - have about 3 sets left or you can get them through www.regal-auto.co.uk
they give 1.5 degree more each, i layered up with two sets and have adjustable front camber plates.
it usually looks like this camber wise
http://www.badlydubbed.com/imgs/photos/2007/meets/oe/IMG_0620.jpg
but im gunna keep this look i think by as someone mentioned, cutting and rewelding the beam
as far as stretched tyres go - dont believe the bullshit. they are fine aslong as you keep an eye on the tyre pressures carefully. if fitted sloppily they will deflate.
as with any tyre either underinflated or incorrectly fitted they will fail. this is why not many fitters are confident in putting them on. they know they have to do a pukka job and often dont need the hassle.
i run 195-45's (recommended for a 7" rim) on a 9. have dont with no problems for a long time no. drive it like a t**t and all the rest.
if you like the look go for it, most of the haters have never even tried it
p.s the reduction in sidewall flex makes for sik lift off oversteer too
i can supply you lads the shims - have about 3 sets left or you can get them through www.regal-auto.co.uk
they give 1.5 degree more each, i layered up with two sets and have adjustable front camber plates.
it usually looks like this camber wise
but im gunna keep this look i think by as someone mentioned, cutting and rewelding the beam
as far as stretched tyres go - dont believe the bullshit. they are fine aslong as you keep an eye on the tyre pressures carefully. if fitted sloppily they will deflate.
as with any tyre either underinflated or incorrectly fitted they will fail. this is why not many fitters are confident in putting them on. they know they have to do a pukka job and often dont need the hassle.
i run 195-45's (recommended for a 7" rim) on a 9. have dont with no problems for a long time no. drive it like a t**t and all the rest.
if you like the look go for it, most of the haters have never even tried it
p.s the reduction in sidewall flex makes for sik lift off oversteer too
clio 172
nice see directional tyres going the wrong way?
ATS CUP'd Dynamique
cheers stanton- your golf looks awesome BTW
when you wear then out in 3k miles you gotta swap em over to get some use lol
cheers RB01
Similar threads
