The Black Pearl.

[Simon@SprayShack]

Hi Will, just seen this thread, bumper looks kick arse Always happy to see pictures of stuff we sprayed on the car, excellent.

 

[willhalligan]

Hi Will, just seen this thread, bumper looks kick arse Always happy to see pictures of stuff we sprayed on the car, excellent.

Haha thanks. Yeah it was a very impressive job. Will definitely be sending you more stuff very shortly

 

[willhalligan]

Only a little update.
Raised up the front about 10mm due to heavy rubbing on the 16s. Dont know if anyone had any better ideas?

Anyway, pictures follow

More pictures will be uploaded on the weekend

 

[jbousfield]

looks sick mate. got a pic of that exhaust put on?

 

[MDP91]

Just stumbled across this after seeing one of your posts, its looking good mate, similar mods to me

 

[willhalligan]

Just stumbled across this after seeing one of your posts, its looking good mate, similar mods to me

Cheers mate, really appreciate it

Loving your car too, looks good with your new rear bumper..

 

[naugc]

hey!what size tires are you wearing? and how many inches you have lowered? beautiful clio!!

 

[Alex5]

how much did it cost to send away and get it sprayed?

 

[guysy]

Just read your thread from start mate, nice upgrades and progress, shame the exhaust doesn't sit snug but its much better than it was before.

 

[willhalligan]

Not really an update but just a few pics of the car, shame they were taken on my phone

Anyway, and mods you can think of that I can do, just say, I'm a bit stuck at the moment.

Comments welcome..

 

[PP200t]

What size spacers are you using?

 

[willhalligan]

What size spacers are you using?

Haven't got any on there yet but in a few weeks in getting 25mm for the rear and 20mm for the front

 

[PP200t]

We're the ones above the thing being measured? Could you tell they were on? I want to get some.

 

[willhalligan]

Oh, the ones above are 5mm spacers. They didn't push them out wide enough, thats why im getting 25/20mm spacers.

I've got them 5mm spacers for sale if your interested?

 

[Blacky950]

Looks good mate, Colour code the front bumper looks miles better. and maybe a cup spoiler.

 

[JakeJ]

looks good mate what have you got it lowered at atm mate. looks about 50mm in the pic.
jake

 

[Alex5]

getting a cup spoiler?

 

[munnster]

lovely buddy not tacky very clean. and what coilovers are you on and how much were they?
and other things i would do is get a cup spoiler or v6 (they are mint!)

 

[G3 NYX]

Hey we should do a photoshoot sometime since we are neighbours!

 

[Kieran..]

adam i think us kent lot need a good photoshoot! how about graffiti tunnel sometime?

 

[G3 NYX]

adam i think us kent lot need a good photoshoot! how about graffiti tunnel sometime?

Defiantly! Do you know a local one?

 

[willhalligan]

Haven't really posted in a while so thought I would keep you all updated. Hit a fox on the motorway the other week and completely trashed the underside of my front bumper so I thinking of going down the rep rs route. Possibly getting a new bumper by the end of this week. Thinking about getting some new wheels soon so saving up my money. Anyway, colour coding everything back to black because got bored of the white badges etc. Oh and I raised up the exhaust because it was hanging way too low, and now it sits just right. Tell me what you think?

I think it looks a lot better all black, just the wheels white. Anyway here are a few pictures below of how the car stands at the moment, reason I want new wheels is because these are 16's and I cant have the car any lower without scrubbing etc. Probably going to get some deep dish with stretched tyres and ride it very low

If anyone has any ideas let me know. Cheers.

 

[twiztid]

That sits loads better looks good tho sorry to hear about hitting a fox

 

[Woody1.4]

Very nice Clio mate just read thewhole thread and i love what u have done with it just to give u some ideas maybe, Clio sport interior (seats n door cards ), wind deflectors, Megan splitter, skoda splitter and maybe a cup spoiler, but the car does look megga mate well done :rasp:

 

[G3 NYX]

SHOTGUN on the alloys!

 

[willhalligan]

SHOTGUN on the alloys!

Yeah you can have if you want when I come round to buying a new set

 

[Will.]

*cough* remove foglight *cough*

 

[willhalligan]

*cough* remove foglight *cough*

 

[G3 NYX]

Wait a minute... You cut the hanger to raise the exhaust?
That's... Not the best way, I suppose if your bumper already had the cut you had no choice.

Next time just slacken the clamp that joins the pipes together near the backbox and twist it, which raises it up, take a look at my thread, we have the same exhaust I think.

 

[G3 NYX]

Also how much are you thinking for the alloys?

 

[willhalligan]

I cut the long piece of the exhaust bracket and welded the two pieces back together so I can't hang as low. Its extremely strong, no worries.
Not sure about a price for the alloys. Probably thinking around £300 because they have 4 new tyres on them.

 

[G3 NYX]

I cut the long piece of the exhaust bracket and welded the two pieces back together so I can't hang as low. Its extremely strong, no worries.
Not sure about a price for the alloys. Probably thinking around £300 because they have 4 new tyres on them.

What tyres are they? Mid range?

 

[willhalligan]

Reasonably cheap ones. I ended up paying like £200-£300

 

[G3 NYX]

Reasonably cheap ones. I ended up paying like £200-£300

Ok let me know when you have replacements, unless you want to swap, I have "15 ph3 wheels

 

[Kieran..]

I know what wheels he is getting

 

[willhalligan]

I know what wheels he is getting

Don't spill the beans....

 

[Kieran..]

Don't worry I won't

 

[G3 NYX]

I know what wheels he is getting

Let me guess... lol

 

[twiztid]

I too know and it did look awesome ahaha will when I get payed I'm comming down too see this zorst! Lol

 

[Kieran..]

I only just noticed you have 3/4 plate on this, looks much better!