Tow Eye

[Grantek]

Can you fit a tow eye to the front of a dynamique without major mod?

cheers

 

[DrR]

I would have though it has one anyway?

 

[Grantek]

yeah but i want a RS style one that sticks out front with the hoop

 

[kie1an]

http://www.cliosport.net/forum/showthread.php?t=358187 you may have to pay membership to look at this

 

[Grantek]

there not an easier way like a straight fit?

 

[Pep]

Theres a tow eye in the spare wheel well with the jack etc....
And there will be a hole in the front lower grille to screw it in.....

 

[Grantek]

cool can you buy any aftermarket one to direct fit?

 

[Fletcher]

I've got a R sport tow eye, but you can get the OMP ones to fit [demon tweaks sell them]

 

[Grantek]

Do you know which one it is exact?

 

[Grantek]

This the one for direct fit? http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=MSPORT&pcode=OMPEB571

 

[Peperami]

Im not sure what you're asking...

You want a race car style tow eye that hangs down?

Or a sticky out loop one?

 

[iimushroomzii]

Unless its a Track car, It'll look s**t

 

[Grantek]

race car style tow eye that hangs down

 

[Fletcher]

race car style tow eye that hangs down

One of these then??

 

[Grantek]

yeah thats the one was that a straight fit? and what one is that?

cheers

 

[Fletcher]

yeah thats the one was that a straight fit? and what one is that?

cheers

Yes it just screws in.

I got in off a group buy on here, it's from R-sport France, so they are quite hard to get hold of.

 

[Grantek]

Are the omp ones a straight fit?

 

[Fletcher]

^^^iirc no, but quite a few CS members have fitted these to clio's.

 

[Grantek]

Anyone know where i can find out what type of thread it is?

 

[DrR]

Don't you have a toe eye in the boot of your car? Will be same thread as that

 

[Grantek]

Yeah but i dont know what thread that is

 

[iimushroomzii]

OMP ones arent the same thread as the normal tow eye, so no they wont screw straight in, but they can be fitted with a bit of f**king around.

 

[Thom]

Just drill the mounting hole and fit it with a bolt on the end. Job done.