Tuned K4J/M Power Figures

[Aliween1400]

Hi Guys
I think it would be great to get all the tuned k4j/m owners in one section showing off their power figures what ever they are
Dyno sheets would be great also
Thanks

 

[bloke]

I'll start then...twingo rs133 220bhp ?

 

[Aliween1400]

I'll start then...twingo rs133 220bhp ?

What turbo u using ?

 

[bloke]

td04 14t off meg 225...for now ?

 

[Aliween1400]

No more k4m owners on here? ☺

 

[Supie]

Hi,

82kw and 153nm flywheel(stock)

72.9 and 137nm wheels (stock)

 

[Sl33pRS]

No more k4m owners on here? ☺

#MeToo ?

 

[Aliween1400]

#MeToo ?

What power u running

 

[Krarl]

Always wanted a Twingo 133, @bloke what rods, pistons and HG are you using?

 

[Sl33pRS]

What power u running

EAGDBe - standard tunung

Just looking the wiki and if the scenic 1.6 K4M782 engine is somehow compatible withr the K4M70x than it could be 120hp

 

[bloke]

Always wanted a Twingo 133, @bloke what rods, pistons and HG are you using?

all stock. was only running about 8psi then.

 

[Krarl]

all stock. was only running about 8psi then.

I'm interested about then "then" part lol

What manifold?

 

[bloke]

I'm interested about then "then" part lol

What manifold?

thread for it https://www.cliosport.net/threads/twingo-rs133.803233/

 

[Aliween1400]

I'm building an "itb'd" 760 at the moment and am not going to run the dephaser and thus run without vvt. Are the cam gear mountings the same for ex and in cam? so if was going to run solid gears each side.........

 

[bloke]

I'm building an "itb'd" 760 at the moment and am not going to run the dephaser and thus run without vvt. Are the cam gear mountings the same for ex and in cam? so if was going to run solid gears each side.........

Why no vvt? You get loads of advance on them and it fully variable?

If not you need to bring the feeds on the end of the can and have it machined to take an exhaust pulley.

 

[Aliween1400]

Why no vvt? You get loads of advance on them and it fully variable?

If not you need to bring the feeds on the end of the can and have it machined to take an exhaust pulley.

Using a non vvt ecu
So what? Have the oil ports blocked and machine the hear end down?

 

[bloke]

If its a vvt cam the just the oilways on thw front of the cam and get it turned down to take the exhaust cam.