ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
use of meguiars
- Thread starter Dafydd
- Start date
you should apply the products with applicator pads (which you should also be able to get from Meguiars.
Stage 1 should only really be used twice a year..
Stage 2 every few months.
Stage 3 can be done as often as you want I believe
Obviously the 1st time you use it, do all 3 stages.
Hope this helps
Alfa Mito 155TB
I have used this stuff once and the first stage polish I used 3 times.
The second stage glaze i did twice in case i missed any areas.
The third stage I did once because i was so hacked off with polishing the car....but I am going to do the stage three stuff every month.
The shine after stage 1 was stunning after stage 2 was better still.
Use a polishing buffer if you can, takes out the hard work of polishing off
I think Ill follow Clares guide.. Applying the wax as often as I can be bothered. Dont fancy using Stage 1 loads.. Ill have no paint left, heh.
Got any pics of using this stuff? Is it noticable better than say, Autoglym Super Resin Polish?
I use Turtle Wax Extreme at the moment - good stuff, but I have loads of scratches on my car, which this doesnt get out - the shine it gets tho is great! Bodywork mega smooth after using it, too... I just think I need something else to get the proper deep colour out.
I did my car with stage 1 the other day and some parts with stage 2. I then left the car for a while as Ive got finals at the minute, but found enough time to coat the rest of the car with stage 2 and some with stage 3.
Initially, I was dead impressed - my car is pearlescent black. The only thing is that it seems to wear off very quickly. I guess that might be due to the fact I cover my car for weeks at a time and theres some rubbing, but it doesnt do that if I use a synthetic (rather than carnuba) wax. I think Ill have to do stage2 again, then use some other synthetic stuff (like autoglym EGP) and then do stage 3 on top. Finals are all over tomorrow!!! But it looks like rain
Alfa Mito 155TB
BenH i think you should go back to stage 1 and clean the paint.....it has to be done right for stage 2 and 3 to key ok
Stage 1 is a paint cleanser and shouldnt be used too often! Its like a deep cleanse that gets rid of the crap on the paint you cant see, I believe this contains some abrasives (mild). You dont need to use this too often. 3 coats is also a bit excessive for this level.
Stage 2 is a polish (much like Autoglym Super Resin), basically fills in any minor marks you have on the car, such as swirls etc.
Stage 3 is a carnuaba wax which tops it all off (you can layer this one a fair few times, say each time you wash the car, and it should look great)
Just Stages 2+3 every few months should be ok.
Get some applicator pads to apply the products with, and some microfibre cloths to for buffing off.
Ive never used this 3 stage product, thats just what I know about it!
Yeah, Im going to do stage 2 and 3 again. But carnuba waxes like stage 3 wear off, so I want to lock in stage 2 with a synthetic wax (autoglym) and then top it up with stage 3. I used to use autoglym, but meiguars is so much better (before it wears off! - must be the car cover).
I found that stage one is much more abrasive (and effective) than t-cut. The only other stuff Id say was comparable is cutting paste. But cutting paste is much more "gritty", so I suspect that stage one has some sort of mild paintstripper stuff in it. I wont be using it very often!
Ben:
If you use AutoGlym SRP on top of Stage 2, it will eliminate the Stage 2, because the AutoGlym contains cleaning properties. In effect you will be starting from scratch.
Ive seen cars that have had good results from just using Autoglym SRP (and in some cases the Extra Gloss Protection on top too), with a carnuaba wax topping of Blitz wax (available from http://www.frost.co.ukwww.frost.co.uk) and/or P21S AKA S100 paste wax.
P21S (American product) is available from Serious Performance in the UK (http://www.seriousperformance.co.ukwww.seriousperformance.co.uk) Site should be up soon apparently. S100 is the equivalent of this, but is predominantly marketed at motorbikes - available from Harley Davidson dealers.
I meant that I would use Autoglym EGP (as posted a few posts ago) after stage 2 and before stage 3. Do you visit http://www.autopia.orgwww.autopia.org too?? I hear that using a synthetic before the carnuba works best.
I used to use SRP, but after I use it on some cars Im selling, I wont use it unless I cant get Meiguars or find some S100.
if u believe what meguairs say, then none of its products have any abrasives in it as it is all natural products, and they claim the cleaner and polish will not damage clear coat or paint.
im ordering some zymol next week bang goes 200 quid then
Alfa Mito 155TB
stage 1 will not strip the paint it isnt T-cut...if the paint is good you dont need to do it all the time either.
I do think meguires if done right is every bit as good as zymol or swissol...but maybe its like buying into a fantasy that paying more money is best...it is difficult to judge because my car with meguiares beads water and still looks clean without washing after two weeks, all we have had is heavy rain. The shine looks soooo deep.
Having meguires i cannot justify spending more on zymol.
But each to there own...would rather have a good night out.
