wheel spacers hubcentric 10mm

[Adz]

Hi i need to get 4 10mm hubcentric spacers where can i get them and how much am i looking at paying for these ? help lol

 

[Fred@BTM]

you'll struggle to get them, 13mm was the slimmest i could find from FK

 

[Plummer]

I always use FK, but as said 13mm was the slimmest you can get hubcentric in, and even at that they don't fit properly without machining them yourself.

There's just not enough material for it.

 

[Plummer]

Found some!

http://www.fk-automotive.de/websale7/FK-Wheel-spacer---20-mm-System-A---fit-for.htm?Ctx={ver/7/ver}{st/3eb/st}{cmd/0/cmd}{m/websale/m}{s/fk-automotive/s}{l/English/l}{mi/166-2834/mi}{pi/1500349/pi}{po/1/po}{fc/x/fc}{p1/39d5bd28d51894fc69f6f8edc1a0847d/p1}{md5/5091f2eadfe7e276fe2b69ab62016991/md5}

Decent price too!

 

[Adz]

they are 20mm i only need 13mm or my wheels will stick out the arches lol

 

[Plummer]

they are 20mm i only need 13mm or my wheels will stick out the arches lol

Thats 10mm a side, (20mm per axle if you read)

 

[Adz]

do they come with the nuts m8 ?

 

[Plummer]

I don't think so, but they have them on the site IIRC.

 

[Fred@BTM]

the FK 10mm ones don't fit, not without machining the hub flange down

 

[Adz]

the FK 10mm ones don't fit, not without machining the hub flange down

lol english i dont understand that lol

 

[Fred@BTM]

they don't fit, that do?

 

[JD]

You can only buy these second hand now. FK stopped doing them for some reason.

 

[franx]

i was once looking hard to get some 10mm hubcentrics and just could'nt find em. Stopped me from getting some brand new 2118's with offset 45 for a price that was just unbelievable I stuck to the good old Turinis

 

[Tigger]

Where can you get these 10mm or 13mm spacers these days then?

 

[.:Tank:.]

Dont Eibach do them now? 10mm hub centric... sure I saw them on a site the other day!

 

[sonny172cup]

What about H&R? Iv used there spacers for a few years now.

 

[sonny172cup]

http://www.venommotorsport.com/product_details.php?id=6074&manufacturer=HR&category=Wheel

 

[bozothenutter]

grinding the hub flange down is easy only needs about 1.5mm removing.