windscreen wipers, uch removal

[sam JFM]

What have people done to control the wipers when removing the uch?

Specifically in relation to the park position and intermittent?

 

[sam JFM]

@Tony Hunter @sonny172cup @NorthloopCup

 

[NorthloopCup]

You'll need a toggle switch and a relay mate. Can't remember if you can get a relay that does single sweep and permanent, or if you would need 2 separate ones for each function though.

There's a lot of pre made fuse/relay boards available now, so all you have to do is put the wires to the relevant terminals on it. You will still need a switch though.

 

[sam JFM]

So there is nothing different about the way the park switch works? switches to earth etc?

 

[Tony Hunter]

Mine either slow, fast, on or off.
No fancy sizzle here.

 

[sam JFM]

Mine either slow, fast, on or off.
No fancy sizzle here.

How did you wire them up?
Its the return to park that i'm a little confused about

 

[Mini182]

How did you wire them up?
Its the return to park that i'm a little confused about

That's what you will need one of the pre-made box's for, as well as the intermittent speed.

Or if you are not bothered there is a fast and a slow speed wire on the motor and you can just wire it up to a switch, on or off, fast or slow.

 

[sam JFM]

That's what you will need one of the pre-made box's for, as well as the intermittent speed.

Or if you are not bothered there is a fast and a slow speed wire on the motor and you can just wire it up to a switch, on or off, fast or slow.

I need park. If i just have fast and slow and turn the wipers off, they will stop where ever they are in their cycle.
Where can you buy these magic boxes?

 

[NorthloopCup]

I need park. If i just have fast and slow and turn the wipers off, they will stop where ever they are in their cycle.
Where can you buy these magic boxes?

Car builder solutions or vehicle wiring products mate. That's where I've seen them before.

 

[Tony Hunter]

I have no park, if I need to turn them off in a race, I just do it when they are on the n/s somewhere.
Really not bothered about them parking in the middle.
Less to go wrong.

 

[barnesautos]

How did you wire them up?
Its the return to park that i'm a little confused about

All you need for the wipers to park is an additional perm power supply .
The motor has a break in the motor circuit as such and parks there if power it there , if no power is there like Tony's then they park where ever turned off .