I need to get access to the speed signal wire and the engine speed sensor. Had a look behind the clocks today, i can see a 3 pin connector attached to the speedo cable (1 black, 2 yellow) and a 2 pin connector attached to the rev counter (1 grey, 1 orange). Can anyone tell me which wires i need to tap into? Should be 1 each for speed and revs. Its on a 94 RT. Any help would be appreciated.
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Wiring for revs / speed
- Thread starter marine boy
- Start date
I need to get access to the speed signal wire and the engine speed sensor. Had a look behind the clocks today, i can see a 3 pin connector attached to the speedo cable (1 black, 2 yellow) and a 2 pin connector attached to the rev counter (1 grey, 1 orange). Can anyone tell me which wires i need to tap into? Should be 1 each for speed and revs. Its on a 94 RT. Any help would be appreciated.
hey mate, you could try this site .. http://www.delta-autotronics.comwww.delta-autotronics.com it may have something you are looking for, or maybe a haynes manual?
justin
sorry, am struggling to get this link working...
[Edited by justinRT on 17 July 2005 at 10:15pm]
[Edited by justinRT on 17 July 2005 at 10:15pm]
[Edited by justinRT on 17 July 2005 at 10:16pm]
Similar threads
