Std. exhaust v yozzasport

[Fred@BTM]

I tried a Trophy with a Yozza cat back system and it was totally unbearable, there far to loud for daily use. Also check the quality, it isn't as great as everyone says.

are in a YS slagging mood today??? :S

 

[Gaz_]

they are only made by a prospeed type company?

corect me if i'm wrong

you're wrong :rasp:

you sure?
post 9

http://www.cliosport.net/forum/showthread.php?t=140699&highlight=exhausts+made

that said, the zorst on subways is pure p**n

 

[S77CCP]

Nope, just telling it how it is. Nobody is immune to quality issues.

 

[Fred@BTM]

who's car was it, and what in your opinion was wrong with it? i'd love to know!

 

[Fred@BTM]

you're wrong :rasp:

you sure?
post 9

http://www.cliosport.net/forum/showthread.php?t=140699&highlight=exhausts+made

that said, the zorst on subways is pure p**n

LOL

 

[172 Dave]

fair q.

 

[Nigel]

Fred, it was good to meet you too. Pity you had to get back, it would have been good to have a longer chat with you. Hope traffic wasn't to bad and thanks again for bringing it over at such short notice.

Service gets a thumbs up from me!:star:

 

[ja.jack]

The Yozza looks exactly like the Supersprint. Who does make it, or is that a trade secret?

 

[S77CCP]

Its owned by a young guy in Leicester, can't remember his name. The quality issues were:

1) The exhaust was too short and didn't stick out like regular 182, which just looked wrong.

2) The exhaust pipes were of different lengths! which was clealy visable

 

[Fred@BTM]

yeah, the YS home delivery service is something i'll have to look into!

Nigel if you're wondering why your centre section isn't polished like the decat, its because we wanted it to get to you as quickly as possible

 

[Fred@BTM]

Its owned by a young guy in Leicester, can't remember his name. The quality issues were:

1) The exhaust was too short and didn't stick out like regular 182, which just looked wrong.

2) The exhaust pipes were of different lengths! which was clealy visable

Karl? young lad?

 

[S77CCP]

Maybe, can't quite remember.

 

[Nigel]

I actually prefer the main system being a matt stainless finish, so it's all good.

 

[Fred@BTM]

we'll if it was karl he had a blueflame decat on which isn't the best quality decat i've ever seen, it doesn't even have a bend in it, which caused our exhaust and his standard exhaust to sit on the piss slightly, not our fault!

 

[S77CCP]

we'll if it was karl he had a blueflame decat on which isn't the best quality decat i've ever seen, it doesn't even have a bend in it, which caused our exhaust and his standard exhaust to sit on the piss slightly, not our fault!

Can't have been him, as this was your cat back system.

 

[ja.jack]

I've got a de-cat from GDI, no bend, will that be ok with your exhaust ,Fred?

 

[Fred@BTM]

dunno, depends who made it

see why i've been banging on saying a 182 decat ISN'T "just a pipe"

 

[ja.jack]

I wonder if Andy will take it back?

 

[Fred@BTM]

found out what make it is fella

 

[ja.jack]

I'm looking at it now.No identification marks on it. The flange with the two holes is slightly off the vertical, does that make up for no bend in the pipe?

 

[Fred@BTM]

is it off the car?

if it is we can put it in our jig to see if it'll line up ok

 

[ja.jack]

Yes, hav'nt fitted it. I like the ''Supersprint'' look of your exhaust, and cheaper price. Does price on your web include fitting, or is that a daft question? Years of experience have taught me to go to the source of goodies to get fitted. Can save expense/stress in long run.

 

[Fred@BTM]

unfortunatley fitting is extra, but obviuosly if you buy our product we discount the labour on fitting

 

[ja.jack]

My standard exhaust at the moment has only done 13k, mostly long runs.
Can I chop it in part ex. I'm kind of kidding you Fred, but if I was like the majority of YS customers, ie, high rollers, I would'nt be be bothered.

I just can't believe you throw these still good parts away.

 

[Ali]

Its owned by a young guy in Leicester, can't remember his name. The quality issues were:

1) The exhaust was too short and didn't stick out like regular 182, which just looked wrong.

2) The exhaust pipes were of different lengths! which was clealy visable

I seen Alan's 182 system, whilst i'm not a fan of the tailpipe design its the most amazing piece of kit i've seen. Pipes WERE the same length...and DID stick out a sufficient ammount.

 

[Alan]

Its owned by a young guy in Leicester, can't remember his name. The quality issues were:

1) The exhaust was too short and didn't stick out like regular 182, which just looked wrong.

2) The exhaust pipes were of different lengths! which was clealy visable

I seen Alan's 182 system, whilst i'm not a fan of the tailpipe design its the most amazing piece of kit i've seen. Pipes WERE the same length...and DID stick out a sufficient ammount.

I thank you...

 

[S77CCP]

And that proves what exactly? I'm not saying that YS systems are all like that, I'm just saying that there ones which are 100% in the quality department.

 

[Ali]

And that proves what exactly? I'm not saying that YS systems are all like that, I'm just saying that there ones which are 100% in the quality department.

And....

Andrew and Fred are very approachable, and to be honest i'm sure they'd like to hear the issues you've seen...This ultimately leads to perfection and increased consumer satisfaction.

What are your benchmarks? K-tec, GDi, Magnex, BTB???

 

[ja.jack]

No more word of Ben's new exhaust,according to him it's a humdinger.
I think it might be revealled at same time as new induction system.

 

[Ross M]

ahem ... how much for a YS exhaust + decat supplied and fitted ?

 

[S77CCP]

And that proves what exactly? I'm not saying that YS systems are all like that, I'm just saying that there ones which are 100% in the quality department.

And....

Andrew and Fred are very approachable, and to be honest i'm sure they'd like to hear the issues you've seen...This ultimately leads to perfection and increased consumer satisfaction.

What are your benchmarks? K-tec, GDi, Magnex, BTB???

I don't have any 'benchmarks' other than the GDI system on my 172,the Haywood & Scott on a mates car and so on, personal speaking the exhaust wasn't on my car so its not for me to bang on Fred/Andrews door and ask the questions regarding the quality of the system, if it was my car however I'd have sent it back and demand a refund, as their exhausts aren't cheap and I would expect a better fit given the price.
Also given Fred can read and us a computer he knows about this and has already 'commented' on it.

 

[Markpw]

Hope you werent speeding ealier Pacey !!
Saw you on the way back from GDI this morning after getting my exhaust and YS decat fiited, bloody hell on full throttle it barks and rasps like a MOFO !!!
Drive it slowly ie not much right foot and hopefully people wont stare !

 

[S77CCP]

Yes I was speeding i was only doing 44 honest! i was on my way up to GDI to order some new brakes, your comment about its loudness were noted! I listern out for you in town next time.

 

[Markpw]

Its a totally different sound to what im used to compared to my powerflow. But i like it (not sure the wife will !)
Hows your trial exhaust going ?

 

[S77CCP]

Fine, you have a PM.

 

[ja.jack]

Are you running in a new exhaust for GDI, S77CCP? Tell us more.

 

[Middo]

I tried a Trophy with a Yozza cat back system and it was totally unbearable, there far to loud for daily use. Also check the quality, it isn't as great as everyone says.

far too loud for daily use??? imo, its pretty quiet compared to other 172 exhausts i've heard and makes all the right noises. Whats the point in having an aftermarket exhaust if its not loud? The quality of the welds etc on the system itself were the best ive seen on an exhaust, and the guy who fitted it (an experienced powerflow dealer with a cracking reputation) said it was one of the best exhausts hes ever seen/fitted quality wise, and really couldnt comprehend how the noise could be so quiet with such a small centre section.

even though i didnt get my exhaust fitted at yozzasport (partly due to the fact he wanted to charge me over double what powerflow wanted) in the past his customer service has been superb and has always spent the time to discuss mods/ options with me even if i had no intention fo buying at that time.

 

[S77CCP]

Are you running in a new exhaust for GDI, S77CCP? Tell us more.

Just ring andy @ GDI, he'll tell you even more than I can.

 

[ja.jack]

I'd rather you told me, he's hardly likely to be unbiased.

 

[S77CCP]

Pop me a PM then.