despoilered and washed...

[MaLicE]

really must take some propper pics some time... just waiting for buckets to be delivered should be 2 weeks, harnesses are in atm... and looking at getting a rear cage with harness bar fitted as i dont like where the harnesses are atm...

apart from that, interior is going from white to carbon atm, and im sourcing a carbon bonnet and bootlid in the next month or 2, then i want wider rear arches... not massive ones just some feed or re adgt9 arches... then wheels... nearly got some work s1's the other day... had to restrain myself, oh and coilovers and exhaust... then it will be engine mods... i will be happy then.

 

[_Tom]

Nice. I'd love one but i'm scared of them breaking.

 

[maximinimus]

You should get that checked, you appear to have run over a metal dustbin at some point and it's sticking out the back of your car!

Nice car but it needs a good detail

 

[MaLicE]

needs a good detail... it needs polishing but its spotless lol, rear bumper marks are when i set fire to it lol! well i say i... i mean it set fire to it!

 

[MaLicE]

and tom, get one! worry about problems later lol, its taken me 2 days to get the fuckin bonnet open!!! i accidently pulled the release cable off of the bonnet catch... i was ready to take an axe to it!

 

[Dansta]

So jealous...
How you getting on with it Alice?
any running probs yet? all or myth?

 

[MaLicE]

not had any running problems touch wood! i drive it pretty much everyday, fueling isnt that bad im used to it with my 200... best driving car i have ever driven!

only prob i do have atm is that i need to take the inlet manifold off to do the rats nest (loads of vacume hoses) and i think one of my solenoids is playing up stopping the second turbo spinning up fully... apart from that its perfect never misses a beat completely fully recomend them you just need to budget for some things, oil changes every 3k but its mineral oil so it costs 15 quid every 3k for oil and filter change!

really love mine to bits!

 

[D4N13L]

Did i read in the title "washed"?

Everything but the wheels maybe

 

[MaLicE]

the wheels have been scrubbed lol that is baked on brake dust it wont come off lol!

 

[Turkish]

Has it ever had a knock? the panelgaps around the bonnet/bumper/headlamps look a little messy in a couple of those pics.

Crying out for some decent wheels on it, those standard ones look a mess.

 

[MaLicE]

the front end the bumper is now tweaked to frig as i was pulling it about in anger trying to open it... already had a small dent in it from where i closed it with a spanner under it lol! it lifts by pass wing and dips by the headlamps and its lifted in the middle lol... i got stressed lol!

 

[Bjorn]

More cleaning products required Looks good otherwise.

 

[Tucker]

tyre shine will transform it,

get some good stuff and it will stay on for a while too!

 

[Daniel]

Washed using what, sticks? :S

Looks bloody filthy! lol.

 

[Jon.L]

needs rims asap

 

[Ali]

Similarish to the one i Polished...Poor condition! Needs ALOT of work!

Nice lookin cars tho.

 

[Naith]

needs a nice machine polish then it'll look epic, autosol the zorst too if u can

great project this, wheels will TRANSFORM it

 

[Gstar2006]

I so miss mine. Mine was a UK spec. I killed my Jap spec after 10 days :'(

If you're doing the rats nets I have a full silicon hose kit still in the box gathering dust in my shed as well as some of the reddy coloured RX7 mats and a used cat. Oh and a set of standard alloys with decent tyres. Look better condition than yours but haven't seen them in a while as right at the back of my shed now!

UK spec 1 of 124 now lives in Sweden

Jap spec before and after in space of 10 days.

 

[MaLicE]

oh f**k lol!!! what you got in the sillicone hose kit for the rats nest?? i need to do it quick i think one of my solenoids is playing up though, its not always kicking in with second turbo... thinking of going non sequential tbh...

got a pic of the mats?? do they have the red/pink stripy bits on them??

 

[MaLicE]

oh and exhaust is going i hate it shitty xs power pos, replacing with a jasma or possibly a nur spec...

 

[_Tom]

See something like this - http://www.pistonheads.com/sales/773141.htm makes me horny. Poss one of my fav looking cars. BUT how much is a rebuild? Thats rolling on 65k which is prob a ticking time bomb. Also, whats insurance like??

 

[MaLicE]

i would be wanting to knock 1k off of that price... rebuild basic one with tips and waterseals is about 1k-1.3k i would atleast want a good compression check with that car!

 

[Christopher]

What's this about de-coking the rotors?

I heard something about using fluid to flush them out, with the engine in situ?! :S

 

[Ali]

You need ROTA's on that!

 

[Christopher]

He'll explode when he sees that...

 

[Ali]

PMSL. Lets hope so. My fav part of the car is the BOSE Mouser!

 

[MaLicE]

What's this about de-coking the rotors?

I heard something about using fluid to flush them out, with the engine in situ?! :S

yeh some people start the car and pour seafoam or just straight water about a litre of it straight in lol... or even coke lol dont think i wanna try it but lots of americans do it lol... im ignoring the rota comment lol i sat here for ten mins thinking what to say lol

 

[Gstar2006]

I'll dig out the silicon kit mate. It's a complete red hose kit for doing the full rats nest as far as I am aware.

The mats are the ones with the stripey bits in. Original RX ones not aftermarket.

The pouring a can of cola into the engine thing is for when they wont start if flooded/coked up. Never had a problem with mine in the few years I had it but then it did have the receipts for a brand new engine fitted at Mazda in Nottingham

The rebuilds scare stories are a bit of a myth to be honest. If you ran a skyline or some other jap car with limited knowledge of the history there's just as much chance of it going pop and a rebuild of a nissan DET engine is a lot more expensive than the 13b wankels is ever going to be even if you need new housings. There's a few companies in the UK specialising in RX rebuilds now dotted round the country and the prices aren't bad

i was looking at going non-seq on mine towards the end of my ownership but I just loved the seamless smooth power delivery from the twin sequentials. There's some mad power being made on the original turbos in the UK now as well both sequential and non. Big power is always gonna need a large single but the cost is a bit prohibitive.

 

[Chrisjk]

Ill have to get some pics up of my mates rx7 when he eventually gets it back. His is also an efini type r, bigger turbos, hks suspension etc. Currently at jimmy's rx7's getting a look over after some monkeys spent the best part of 2 years fu#!in it up.

 

[MaLicE]

grab a pic of the mats for me too mate!!

just found out mine is non sequential, but i have the standard cat fitted with the air pump gone... im thinking the cat is clogged up or collapsed it rattles around a bit so gonna stick the decat back on tomorrow and just have to deal with the noise lol!

is it those mats??

 

[Ian_182]

Christ.

What did it look like before you supposedly cleaned it

 

[MaLicE]

im sorry but im not sure if its the pics or not lol its spotless, the paint is actually pretty good! there is no mud or dirt on it in them pics, its spotless lol u can see the f**king reflections of dirt but there is no dirt on it!

 

[n0rm]

very nice car dude, shall be watching this cars progress

a good freind of mine james willday has one very like yours running 600+ hp he was the quickest no tuner cars a JAPfest last year

http://www.youtube.com/watch?v=Cmlbwap8hlY&feature=related

 

[MaLicE]

very nice car dude, shall be watching this cars progress

a good freind of mine james willday has one very like yours running 600+ hp he was the quickest no tuner cars a JAPfest last year

http://www.youtube.com/watch?v=Cmlbwap8hlY&feature=related

norm i know james wilday from when he had r5's lol i was at brunters with him when pgti did a r5 shootout! i keep meaning to chat to him but at the same time i dont cos i know i will end up with a bigger shopping list lol!

 

[n0rm]

norm i know james wilday from when he had r5's lol i was at brunters with him when pgti did a r5 shootout! i keep meaning to chat to him but at the same time i dont cos i know i will end up with a bigger shopping list lol!

LOL small world mate, hes not ong sold his white 5 mate! was an animal that thing

hes currently having a (another) tilton gearbox fitted to his REX..hes already gone through 3

 

[MaLicE]

LOL small world mate, hes not ong sold his white 5 mate! was an animal that thing

hes currently having a (another) tilton gearbox fitted to his REX..hes already gone through 3

lol that 5 was nice, he spent sooooo much on it though lol, and seems like he is doing the same to his rex lol!!! i would love to get mine around 500bhp at a safe level anyway but thats a fair way off atm, gonna cost alot lol!

 

[Little Newms]

Shocking Alice!

 

[Little Newms]

Im with the others..... Have you eben touched the wheels or lower area's of the car PMSL!

 

[MaLicE]

the lower areas of the car is spotless still are lol! its the reflection of the floor and path ffs lol!!! and the wheels were scrubbed but it wont come off!!! even stuck the path cleaner on the pressure washer supposedly makes it 50% more powerfull... (hurts the f**k out of your hand if you put it infront of the water) and they still wont clean any better!

 

[Revels]

For someone with your kit and normal skillz, those pics are shite.

xx