question about oil return for turbo

[stevenajames2012]

hey guys just wondering what size hole i need to drill what tap size and what fitting i need to use? cheers

this is how i want it done just wondering what i need to use cheers

 

[Laine_16v]

I had 3/8" BSPT thread drilled and tapped thread where the above is shown.

Bought one of these (3/8" TSPT thread to 1/2" hose tail) http://www.ebay.co.uk/itm/BRASS-BSP...main_3&var=&hash=item3cc003e906#ht_3667wt_799

Used AN10 Aeroquip hose, and then the appropriate fitting for the turbo (in my case a 45 degree AN10 fitting).

 

[stevenajames2012]

I had 3/8" BSPT thread drilled and tapped thread where the above is shown.

Bought one of these (3/8" TSPT thread to 1/2" hose tail) http://www.ebay.co.uk/itm/BRASS-BSP...main_3&var=&hash=item3cc003e906#ht_3667wt_799

Used AN10 Aeroquip hose, and then the appropriate fitting for the turbo (in my case a 45 degree AN10 fitting).

cheers mate

 

[stevenajames2012]

is half inch big enough? cheers

 

[Laine_16v]

Yes definately big enough. 1/2" / AN10 for Journal bearing, you can get away with smaller for roller bearing (3/8" / AN8)

 

[stevenajames2012]

ok cheers mate

 

[stevenajames2012]

Used An10 Aeroquip hose, and then the appropriate fitting for the turbo (in my case a 45 degree AN10 fitting).

what type of hose is this isit braided?

 

[Laine_16v]

Nah didnt bother with braided.>> http://www.ebay.co.uk/itm/AN-10-10A...CarParts_SM&hash=item256a1b36e7#ht_1213wt_717

Only needed about 10-20cm of it aswell.

 

[Tin cup]

You can return the oil to the sump

 

[Andyrg@ ClioTurbo]

I use and can supply a 1/2inch bsp fitting drill and tapp