ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

16v_paddy
Reaction score
1,272

Latest activity Postings About

    • 16v_paddy
      16v_paddy replied to the thread Cayman S - Lap of death.
      Is it the same guy from the GTR kebab microwave video at Bedford?
    • 16v_paddy
      The servo in my pic is the 1 that split itself open so that bit was already easy to disassemble 🤣 The rod the pedal attaches to is...
    • 16v_paddy
      I thought the 182 master cylinder couldn't be used because it only has 2 ports where the non abs one from the Cup has 4 ports? I was...
      • servo.jpg
    • 16v_paddy
      I I'm thinking this could also be related to the master cylinder being different on the Cup - I could also be talking a load of...
    • 16v_paddy
      You can't use sensible logic like that with French cars :ROFLMAO: You'd think that's the case but there really are a load of things...
    • 16v_paddy
      If I was in this situation again I'd be getting my hands on some other servos & dismantling them to measure & compare stuff inside (I...
    • 16v_paddy
      You've got no chance of restoring yours, the rust has completely compromised the metal at the point it needs to be it's strongest...
    • 16v_paddy
      Not sure if the silicone is visible in these pics tbh but you get the jist of what I was trying to do
      • 20221001_032026.jpg
      • 20221001_031944.jpg
      • 20221002_193038.jpg
      • 20221002_000610.jpg
      • 20221002_192325.jpg
      • 20221001_031930.jpg
      • 20221001_180945.jpg
    • 16v_paddy
      These are the part numbers from mine & what I got from Autodoc. You can see the side by side pic that the servos are different. I reckon...
      • 20220829_204346.jpg
      • 20220915_194642.jpg
      • 20220915_164937.jpg
      • 20220915_164203.jpg
      • 20220916_200541.jpg
      • 20220916_234506.jpg
      • 20220916_234515.jpg
      • 20220829_204338.jpg
    • 16v_paddy
      Sounds like Mick has got a dose of amnesia & forgot all about the exact same nightmare I had with with mine just over 2 years ago...
    • 16v_paddy
      16v_paddy replied to the thread F7R710 SWAPPED CLIO.
      The cams I mentioned are the ones that work perfectly fine with the stock F7R springs and lifters - a lot of people have used those with...
    • 16v_paddy
      16v_paddy replied to the thread F7R710 SWAPPED CLIO.
      That's mega high rpms for a stock bottom end 😳 My f7r setup is running at slightly higher rpms but it's got forged rods, forged high...
    • 16v_paddy
      16v_paddy replied to the thread F7R710 SWAPPED CLIO.
      Cams are a must for that engine as the original ones are junk, fitting standard Williams F7R A700 cams into a megane engine usually...
  • Loading…
  • Loading…
Top