ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Brigsy's latest activity

  • Brigsy
    Brigsy replied to the thread Cruise control randomness.
    Yeah just pulls off.
  • Brigsy
    Brigsy reacted to Bowz's post in the thread 172 Cup OEM+ with Like Like.
    Had a big birthday recently and the wife surprised me with a weekend away (kid free) in a lodge in the sticks of West Wales. As it was...
  • Brigsy
    Brigsy replied to the thread LOOKING FOR INFO.
    Found 2 sport subframes on ebay in 20 seconds https://ebay.io/m/hwIgYD https://ebay.io/m/QQEkWQ
  • Brigsy
    Alrighty guys, Finally put enough time on the brembos post conversion to update. Brembo conversion is great but everyones right when...
  • Brigsy
    Brigsy replied to the thread Clio 182 Turbo.
    Yeah tbolt also crap for boost hoses. Jcs clips usually adequate for loads of boost if the hoses fit good. If your feeling flush the...
  • Brigsy
    Not made any but wouldnt worry about working under a set, 3x2 timbers stacked like that will be solid. Id be more concerned getting the...
  • Brigsy
    Brigsy reacted to MAXRUNDOWN's post in the thread Clio 182 Turbo with Like Like.
    I've never had an issue with genuine Jubilee brand hose clamps biting into hoses, I always give them a little spritz of silicone spray...
  • Brigsy
    Brigsy replied to the thread Clio 182 Turbo.
    The tail bit doesnt generally give any issues cutting into the hoses with jcs if properly sized to the hose. As for the turbo hoses...
    • 20260327_143108.webp
  • Brigsy
    Brigsy replied to the thread Clio 182 Turbo.
    Them t bolt clamps aint great being honest mate. Bands too wide and they back off causing leaks. Jcs high grip be much better.
  • Brigsy
    Brigsy replied to the thread Donor dilemma.
    Same double nut on mk2 wishbones as oe, one to secure wishbone, subframe brace then nut. Easy to tighten with extension and wriggle joint.
  • Brigsy
    Brigsy reacted to Yarp's post in the thread Clio 182 Turbo with Like Like.
    Usual Tuesday service resumed. Put the rad pack together with the new rad and ac condenser. Didn’t come with a dryer so recycled the...
  • Brigsy
    Brigsy reacted to Louis's post in the thread First Car Project - Clio 172 PH1 with Like Like.
    Ktec are s**t. Find some 2nd hand bilsteins/bcs
  • Brigsy
    Brigsy reacted to NorthloopCup's post in the thread First Car Project - Clio 172 PH1 with Like Like.
    I’d run a die down that thread and replace the nut. You might be surprised and it may well be ok.
  • Brigsy
    Brigsy replied to the thread Which Battery?.
    Yeah s4 will be fine, check its the right spec and send it. My theory is buy the cheapest to spec bosch as it will prob need replacing...
  • Brigsy
    Brigsy reacted to cat171's post in the thread UCH service with Like Like.
    Cheers bro! You did say, but I didn't want to believe! :censored:
Back
Top