Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Is this for both front (pull stalk) and rear (push stalk) washer?
Check the fuses first (you'll see if the little wire inside them is broken or not), and replace if blown and try again. If that doesn't help, check for voltage at the pump connectors. The pumps are the black cylindrical things...
Know if there's some table of offset and stud pattern for different cars? Would be really useful - cheers! Don't even know what the mk1 offset I need is (with 165/65/13)!
Got a '94 1.4 RT, engine runs a dream even though it's got 130,000 miles on it. The clutch is a bit nasty though - it's driveable but a really heavy pedal, the biting point is stupidly high, and it takes some persuading before the clutch catches into place - it slips quite a lot as (after) you...
Thanks too - question though...
in the Haynes, it shows a lovely clear picture of the clutch pedal once you've removed the lower fascia panel, for removing the pedal/cable/etc. In practice, I took the panel off and I could see a little bit more of the pedal, but there's still a dirty great...
Looking blue is fine, I'm not buying HIDs... and it says they're brighter than normal halogens... basically, can I go wrong anywhere, like by buying something that's going to explode backwards and shoot through my engine?
Seeing as I'm a poor student and pootle along country lanes now and then with my disintegrating mk1,
where can I go wrong with these?
http://cgi.ebay.co.uk/H4-Xenon-light-bulbs-HID-Renault-CLIO-I-1-ALL-MODELS_W0QQitemZ180019712644QQihZ008QQcategoryZ10410QQrdZ1QQcmdZViewItem
Would be quite...
Funny you should say that - I just replaced all my engine mounts (and it drives MUCH better), and I think the synchro on first gear has gone, because I have to be almost stationary (less than walking pace) to drop into first. Is that a Clio thing or does my gearbox need a rebuild?
BTW the...
Gonna ask the same thing - got a mk1 RT with high bite and very heavy pedal. I'm happy with it - except that if I try and powershift (stay on gas) the clutch doesn't engage again when I bring the pedal up, it just keeps on slipping until I lift off the gas and let it grab. It also doesn't grab...
On my ph1 RT the top one is the dash dimmer, yes, and one of the bottom switches is for the front fogs and the other one is dead. Hmm... I wonder if mine has wires from underneath...
Hiya :)
Sorry my first post here is a request for help - promise not to make a habit of it!
I have a 1994 RT (1.4) that I've been running for a month now (since I passed) and it runs nicely, but there's one little niggle I have with it: the throttle has a really jerky bit at the top of the...