Search results

When i changed the coolent in my mk2 ph1 1.4L clio i broke the bleed nipple in the top hose. Does anyone know if you can buy just the screw in nipple?

What is a block tester?

iv ordered a compresion testor so will test it at the weekend and then see where to go from there.

after i had the car running the other week with the engin stopped when i took off the oil cap i had some somoke coming out of there.

Drove my clio today after not driving it all weekend and it was really juddery as i drove. It was like it didnt want to pull at all. On the way home from morisions it was even worse. It has been using more water than normal for a few weeks even though it has a small leek. There is a little white...

Was fine when i used it this morning, no smoke and ran fine. Will give it a good run when i get a chance.

there wasnt any the other day when i checked under the oil cap or on the dip stick. there was a tiny bit of milkky stuff in the breather tube when i cleaned my air filter the other day. it was like it didnt want to idle propely this morning.

I started my car up this morning to go to work and it ticked over really rough and also had lots of white smoke pouring out the exhaust. By the time I had driven to the train station it had stopped smoking and was running fine. On the way home it did the same again but there was more smoke this...

will have to go get one and hopefully it will work after

do you have to change the plug on the wiring as well or just the sensor? anyone got a price for a new one?

The speedo on my 1.4 8V mk2 phase 1 clio stopped working at the weekend and then started working on its own again with out problems after dancining around for a while first. Then today after it worked all day yesterday it stopped again but kicked in again a couple of times. Does anyone know how...

is the thrust bearing expenceive to get chaged if it had gone?

can i not use a washer to seal it?

just found some 8mm ones and they fit it. need a deep socket though to fit them on all the way.

Anyone know what size nuts you need for fitting the frount seats as one of them has come loose and fallen off on my car.

I'll have to try that one on my way to work tommorow.

Sometimes when i pull away my clutch makes a slight squeeling sound, it only does it every now and then though. Some times as well the my car dosent pull as well for a few seconds then it picks up and is fine. Any help would be much apperacitied.

while changing my rocker cover gasket at the weekend i notised i could move the engine back and forth a bit by hand and am thinking of changing the engine mount on the cam belt side of the engine. I was just wondering where the best place to get them from was and how much they cost.

i had a aftermarket bumper on my clio but the speed ramps in milton keynes dont like low cars so got a new standard one so now need fog lights to fill the holes in it.

will look on there then hopefully some will crop up

Anyone know where the best place to buy both front fog lights, the surounds that hold them in place and the wiring to link them is. I have a W reg clio s.

It does it when im driving normally i dont floor it when its cold. will go down halfords now and get some cleaner and see if that helps.

I have an intermintint problem with my w reg 1.4 8v clio. every now and then while driving along it will suddlenly loose power and the revs will drop even if the accelerator is pressed down more. after changing gear eather up or down it is fine again. It only does this when cold and once the...

Where can i find the engine number on a 1.4 clio s. its a w reg 2000 model if this makes any difference.

Is this the right window regulator for a w reg clio? http://cgi.ebay.co.uk/RENAULT-CLIO-2DR-ELECTRIC-WINDOW-REGULATOR-MOTOR-WINDER_W0QQitemZ4614513064QQcategoryZ10410QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

you might of seen it before, i brought it like it. its been on a web site i think.

Heres a pic of my new clio. http://i43.photobucket.com/albums/e374/djdan18/013.jpg

Thanks, thats anougther thing iv got to buy for my car now.

I went to put my drivers electric window up today and as it started to go up i heard a crunch noisoe and then it stopped. I had to pull the window back up using my hands. the motor still seams to work but the window dosent move, when i drive it starts to slip down so its taped shut at the...

Would a deep cycle battery and uprated alternator stop it happening?