Search results

Thanks matey. Do you recall putting yours in 5th with the engine off being/feeling different to the engine running?

Thank bud. There’s a few out there been do.

Something can’t be assembled correctly. I personally can’t see the hub it’s self or hub flange being bent, more likely not pressed in square or fat enough so the disc is sitting to far forward. Could just be the Caliper or carrier not fit correctly tho. If you get it apart, remove the disc and...

So we have working gears now, although 5th and reverse are difficult but I’ve read this is the case with the engine not running. Anyone confirm this? Haven’t finished the cables yet but they work. I’d rather get these long cables working than pay another £250+ on another set. If these are a...

Wheels come loose more often because of incorrect painting/powdering than correctly fitted/torqued spacers

All makes sense to me now 🤦🏻‍♂️😂😂

Are you going K20? Yeah I’ve seen them. The hybrid cables I have are the similar length as the DC5 and don’t think 100mm shorter will cut it 😂. I really want to use these hybrid ones as they’re meant to be really good. I nearly took them apart last night to see if I can shorten them. If you...

Managed to drill and tap the shifter tower. Pretty poor design considering it’s designed for this type of shifter as the mounting holes for the shifter line up with the legs and weld underneath🤦🏻‍♂️ Had to mount it over and back to get the front 2 bolt holes in the middle of the legs. cables...

Sounds a good laugh this 👌🏻 Couple of mine mates are doing similar with a saxo.

_danielchambers_

Good to hear. The looms do look really good.

Ive got hybrid racing cables but not sure if I’ll use them as they’re massively long. I want to use them as they look much better than Oe cables. When I redo the cage I’ll be looking at Moving the seat further back but not this year.

😂😂 my wife’s asking why I’m laughing 😂😂 I’ll leave it in hear and chock the wheels 😂 I wasn’t planning on refitting the handbrake to be honest. Depends if it’s required in whatever race series I enter eventually

Making tracks on the shifter. Once the shifter cables are routed I can put the fuel and brake lines back in, adding my bias valve back in and more importantly getting the wiring started.

Subscribed to this 👌🏻 The K20 certainly sits nicely in the Clio chassis

Thanks bud. I’m sure I will and then change something after 😂

haha hopefully it lives up to the hype 😂😂

Another piece of the puzzle arrived.

Thanks mate. I try and keep up with yours but you’ve got about 6 on the go 😂😂😂

If you undo the coolant bottle and brake fluid reservoir from the bulk head and pull them away, you might be able to squeeze it out the side from the top. Might be worth a try as this is how I fitted my puremotorsport manifold

More parts arriving 😁 So ECU, full race spec engine loom and universal Kswap harness to match engine loom ordered. Engine loom was in stock so that’s arrived and test fitted already Brand new everything and everything specced to race/Motorsport with a lovely bulk head plug 👌🏻 Also...

Personally I can’t see the TB making that much difference. I had one when I fist had the car and never mapped it. You can remove the breather plate yeah 👍🏻

if it’s the left spark plug as your looking at the engine it’ll be the seal for the dephaser solenoid. It’s about £10 from dealer and 20minute job.

I’m using OE loom and ordered a basic Kswap harness to make the rest myself yeah. just spend a s**t load with Racing Circuits.

Looks good 👌🏻👌🏻 Where did you get the wing vents from?

ECU and wiring stuff ordered 👌🏻 Couple weeks wait but that’s another big step. Ordered little odds like sensors , jubilee clips, new cv nuts and other boring stuff. Awaiting something import for the inside, been waiting ages and can’t move forward until it arrives. so annoying as everything...

Vibratechnics stuff is great. I’ve used it on Vag stuff mainly and it’s always been awesome. I tried 2 different brand engine mounts on my current Leon and both were crap so went VT mounts 👌🏻

I’ve got the PMS stub axle kit. Lovely bit of kit 👌🏻 Sure it’ll cure your issue.

Cheers mate. Turrets, mine were cracking where the 3 bolts were drilled for bolt in top mounts. So the caster kit from PMS was the easiest solution with a bit of man math including the upgrade. Subframe is PMS first design suspension, tubular arms, strengthened subframe, roll centre...

Wiring I haven’t decided what route to go just yet. I’ve got a Cartek PDP panel and AIM dash so pretty easy hopefully. Only Clio parts will be brake lights, indicators, wiper and intank fuel pump. Can see the rear dog bone in this pic No front mount but the Front is pretty good for space...