ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. Jay Payne

    Burpspeed Version 2: Race Car Build

    http://www.cliosport.net/forum/showthread.php?456654-Nicks-172-Cup-From-The-Start!&p=7538544&highlight=reshell#post7538544 ;)
  2. Jay Payne

    Burpspeed Version 2: Race Car Build

    Imgine how many reshells Ian would of done over the years
  3. Jay Payne

    Burpspeed Version 2: Race Car Build

    Flol No
  4. Jay Payne

    Burpspeed Version 2: Race Car Build

    Standard beam is rubbish when using sticky tyres. We got fed up with having to change camber shims around to try and square it up after races. Geo doesnt budge now (unless you get hit by some knob at Donington who breaks the wheel while hes at it)
  5. Jay Payne

    Burpspeed Version 2: Race Car Build

    As Tony says we dont run an ARB now. Just the Pure beam stiffening kit but fitted to a 182 Cup rear beam (Thicker stock roll bar than 172, about 2mm iirc) When we tested it it was 'almost' the same balance wise. Just needed a small tweek on dampers to get the same 'feel' we had before.
  6. Jay Payne

    Burpspeed Version 2: Race Car Build

    Theres nothing special on it to make it like that. Just well setup, as in balance. We spent ages trying to get it just right for how we wanted it. Far too many cars ive been in that have tons of fancy bits (expensive coilvers etc) and understeer like sh!t. You need a slightly playful setup to...
  7. Jay Payne

    Burpspeed Version 2: Race Car Build

    Wow, aggressive racing much?
  8. Jay Payne

    Burpspeed Version 2: Race Car Build

    HOLLY SH!T!!!! :eek:
  9. Jay Payne

    Nick172Cup's 3rd! 'TrackCup' Progress Blog.

    Same thing anyway (My laps/Tran-X) they all AMB transponders
  10. Jay Payne

    Dingers CSCC Tin Top Build

    That does look good mate
  11. Jay Payne

    Burpspeed Version 2: Race Car Build

    2nd in class, Ian won both races. He's Mr Cadwell
  12. Jay Payne

    Burpspeed Version 2: Race Car Build

    Before anyone asks that is the roof scoop inlet you can see above Tony. its normally not seen as I put the rear footage there Race 1 Race 2
  13. Jay Payne

    BIGASH/FF-Racing X85 Clio Cup Racer Project

    If facebook says its ok then it must be. I was just guessing, ive no idea whats involved
  14. Jay Payne

    BIGASH/FF-Racing X85 Clio Cup Racer Project

    Surely would need doing with the box stripped?
  15. Jay Payne

    BIGASH/FF-Racing X85 Clio Cup Racer Project

    Paint over it once its done, premanent repair then ;)
  16. Jay Payne

    BIGASH/FF-Racing X85 Clio Cup Racer Project

    Ive repaired fuel tanks, sumps, high pressure pas pipes, oil coolers etc with it. You be amazed how good it is
  17. Jay Payne

    BIGASH/FF-Racing X85 Clio Cup Racer Project

    Job Done :approve:
  18. Jay Payne

    Burpspeed Version 2: Race Car Build

    He was behind a big smokey jap thing when it goes
  19. Jay Payne

    Burpspeed Version 2: Race Car Build

    at 11 Mins and 30 seconds ish
  20. Jay Payne

    Burpspeed Version 2: Race Car Build

    Its not a Hero 3. We will probably just drill a hole in the case if its a problem. The car is wired for power near there for that anyway
  21. Jay Payne

    Burpspeed Version 2: Race Car Build

    Didnt tell me about your little off track trip late in race 1 ;)
  22. Jay Payne

    Burpspeed Version 2: Race Car Build

    Nope, still 9GB free on the GoPro card (its a 16GB) No idea what happened. What footage there is tho is great watching
  23. Jay Payne

    Burpspeed Version 2: Race Car Build

    No rear footage at all, race 1 Go-Pro ok (and uploading now) Race 2 cuts off half way
  24. Jay Payne

    Burpspeed Version 2: Race Car Build

    So the SD cards have arrived, there aint a lot on them. Would of been good if the cameras were on
  25. Jay Payne

    Burpspeed Version 2: Race Car Build

    Day off I think
  26. Jay Payne

    Burpspeed Version 2: Race Car Build

    As soon as the post man drops the SD cards through my letter box I'll get the vids up (if there is any footage on them).
  27. Jay Payne

    Nick172Cup's 3rd! 'TrackCup' Progress Blog.

    Yes Phil, a race, tomorrow
  28. Jay Payne

    Starter motor location in F4R

    Confusing how you said several times to remove the live and earth. There is no earth on it
  29. Jay Payne

    Burpspeed Version 2: Race Car Build

    Has the sun gone down yet?
Top