Search results

I hope they don't mean the caps for the other end of the cams 😅

Been a very long time since i've taken any track pictures.

Sounds cheap to me. Just make sure you're getting everything including the seals.

Ahh right, well it looks like they need doing now 😏

Can't own an M car without a BTG plate 😅

Yes. Did they change the seals when it was done? It's part of the job as the pulleys run against the seals.

Ahh I read it wrong, some reason thought you meant the original cars price from new 😅

You've spent £10-12k on it? 👀 Looks amazing.

Thieves know most Clios don't have cats in them 😂

Yes, this as well. Worth logging temps as just seeing the dial reach middle and saying 'it's up to temp' isn't accurate enough. It'll reach middle at like 50-60c, where as it needs 75+ for full rev limit. Cold limiter is 6,700rpm.

Remove the sensor and check for any damage. 2 x 10mm's on the top of the box where it joins the engine. That code is for an intermittent fault.

Tie rods are all the same length on Ph2 172 and 182's. Not sure on the length but they 'look' about right.

Only thing you can do is send them back really.

No reason why they shouldn't fit. The centre bore for the wheels is 60.1mm Is there any corrosion inside your wheel bore?

Well overdue a rebuild then.

Bigg Red or Brake Parts International on eBay.

Sticky piston and/or slider pins.

Sorted now thanks to @Mr Underhill

Some things are a mystery on these at times 😂

Yeah that's weird. I removed mine when I stripped it down to do the heater matrix and taped it in position and it still threw a wobbly when plugged back in. Managed to tweak it by hand afterwards and that cleared the lights. Underneath the angle sensor when you pop it out, on the main part...

I can't see how swapping the wheel over has suddenly broken the angle sensor.

Unless I'm missing it in the specs, I looked at one when they first came out, would much rather have the Snap On for £500 just to have the angle setting.

Yeah. Too bad they don't do torque angle like the Snap On. For the price of them you'd think they would 😅

PFF60-301 the purple wishbone ones are the ones I'm after if you can mate.

Does anyone have a contact for getting Powerflex bushes? Used to get them through @Feirny but he's not around much anymore. Looking for wishbone bushes in particular.

Key fob battery, not the car battery.

Have you tried a new key battery? Flash immo light is key not recognised, sometimes a new battery in it fixes it.

I made my own from Grade 5 titanium. Paul from CL Brakes can make you some I think.