Search results

Noooo I like em! Better than the ones I had on before hahah! Yeah they need to crack on with it!!

So this summer of 2020, pretty much stuck inside I decided I wanted to fully rebuilt the front end. Full subframe got all the blasted and powder coated, New wishbones with powerflex bushes all round, New ball joints, Every single exterior bolt off another car I had blasted and zinc plated...

I wasn't sure on the condition of the JC5/130 but I did know they are alot stronger than the previous circlip type so I took the gamble. I then went and bought a ported head with some 197 camshafts, got some very nice inlets made up by m.s custom engineering, he also refurbed my brakes as...

Not sure if this is in the correct section so apolgies if not. Are there any previous owners of this car on here? I have had it for around 2 years now after I bought it in a sorry state for £350. All I knew was the engine was no good and the obvious body work damage. As you can see from the...

Does it have the fic wired to it!?

As per the title, stupidly I cut it from the loom and didn't re lable it so I'm stuck on which wire goes were, does anyone have any photos or help on wiring it into the engine loom 182 if it makes a difference? Thanks.

Was the immobilizer even tho the light went out, it was still causing issue, used clip to go into it and removed all faults.

Got it started mate, needs more tuning sounds like bag of nuts lol

Probs😆

Earth sorry*

So bought this a few moons ago with a piston out the block, needed abit of TLC which I've done, belts ect 197 cams fitted. I can't get it to run... Engine turnes over but the battery and stopight was flashing,?!? Now I've check the immobilizer, crank, engine relays ect everything is okay...

Hi, mine here!, EK54 YVU is the reg :)

Surely there's someone who can help? After a dash loom for satnav!? Surely someone has one stashed away or something, I need to borrow one to complete mine as someone cut satnav part away from main loom..... [emoji23] if youre local I'll even remove it and fit you a spare one in for the time...

Hi, so a while ago I went to pick my girlfriend up her first car. Stupidly I totally forgot to check for the locking wheel nut! Any way, it's not there... Stupidly again before thinking it threw I hit a socket over the nut but now that spins too. Anyone got any idea how I can get the socket off...

All I'm saying is I had an issue with my pedal where it would work one second and then the next it would be dead, but ya okay , fixed it by opening it up cleaning it and re greasing the contacts Sent from my ONEPLUS A5010 using Tapatalk

Duff? Just seems alot more common than what you think ... Had it happen on 2 of my clios... Sent from my ONEPLUS A5010 using Tapatalk

I see it alot on csoc Facebook page Sent from my ONEPLUS A5010 using Tapatalk

I've seen it happen alot to be throttle pedal tbf but both are common tbf Sent from my ONEPLUS A5010 using Tapatalk

Yeah mate I just told you the common things [emoji14] you can open up the pedal if you feel competent and clean the contacts. I had to do that with mine... Sent from my ONEPLUS A5010 using Tapatalk

Get it plugged in but commonly it's throttle body/Pedal Sent from my ONEPLUS A5010 using Tapatalk

I've just been on the search and found these wires snapped, are they sometiming else or? Do you have a diagram for this plug? Eg what wires are for what Sent from my ONEPLUS A5010 using Tapatalk

I have tried both pedal and throttle body both of my daily 182 but no work :( Sent from my ONEPLUS A5010 using Tapatalk

Oh right mate let me know if you get it sorted Sent from my ONEPLUS A5010 using Tapatalk

Did you check the front abs rings too?? Sent from my ONEPLUS A5010 using Tapatalk

Any MK2 ph2 squib should be fine mate Sent from my ONEPLUS A5010 using Tapatalk

Hi, I bought a clio sport 172 03 plate on the advert I bought it from, it was listed as immobilizer issue and won't start, I've had a few clios so once I receive it, It isn't the immobilizer? The light flashes normally, put key in turn, and it just turns over with electronic fault light? 2...

Brilliant! Just want I wanted! Will get some ordered now! Thanks mate.

Clio 182 cup ones? Any links?

Anyone ever had any experience or ordered any parts that fit the cup rack? I need the track rod arms but the renualt ones are quite a bit out my budget at the moment and I'd like it replace them while I'm doing the abs rings? Any part numbers that fit for the SMI rack? Can't find nothing :(

this thread is so brilliant and amazing yet sad at the same time. im trying to understand how to retrofit climate but i dont understand :'( iv fitted dash loom, heater matrix and heater box , lights up but doesnt blow! help! :(