Search results

It's fixed good news. I was working on my own so pal came round I could hear throttle trying to work so removed the internal valve Then tried and worked so replaced throttle plate all sweet now. Back to the job at hand a misfire changed plugs and leads no good. It seems it's the injector as only...

Has been plugged in but not on clip cleared codes but fault still present. I have voltage at plug etc. I checked all fuses in engine bay near relays and the ones in the car all good. And yes was unplugged and actuated. Thanks all for help

Yes I had disconnected a few times(and had no issues) not forced off but correctly removed checked all wiring doing it again as I type. Worked fine before just developed a mis fire so changed plugs and leads. I wasn't going clean as wasn't that dirty and the short time ive had the car I no it...

Hi all I've checked all wiring nothing as was problem before non starter/ car starts but has no throttle I've got the code on a mac obd as throttle pedal postion sensor switch a. So I guess pedal or throttle. It was fine before I changed plugs and leads. But I did clean throttle and actuate move...

Yeah plugged in as I have rain inlet on and off lots now to check for all sorts lose connections air leak etc. I think Fred says if you move flaP in throttle will need clip. To program throttle stops oPen and closed. But I'm hoping this is not the case. All I done was clean with carb cleaner...

Hi all again. Yet another problem my fault I believe. Car was running rough so changed plugs and leads. So removed inlet while there I thought I'd clean throttle so I did put all back together now no throttle. I've checked all connections and had inlet on off about 6 times to see what I've done...

Tried the quick reset hold in stalk press reset and nothing still the same going put more fuel in see if that helps but tank was very full when I had pump out. Maybe sender unit more expense.

Hello all, after all the much needed advice I received on my non starting problem I have a new one for you all to solve help me with. Since getting car going fuel gauge don't work. We did remove fuel pump unit to check pump was working. Could I of done any thing to cause thee fuel level not to...

Thanks to all who helped on this. Was 1 small red light in loom above g box as many say where wires come back on them selfs. Now just to sort out the clicking relay in foot well non working fuel gauge and engine management light.

I tried it all I need some one with clip in Watford any takers I'll pay an I'm not cheap. I check all wiring 1 relay gets rather hot 1 on its own behind headlight. Or maybe I could borrow a ecu etc I'll pay just to make sure not u c h ecu transponder. I'm running out of time and patience

No rather keep money in my pocket. I'll just have keep checking things until it pops up or is there anyone out there who wants a go at fixing cash waiting. As been at it 2 half days now checking this that swapping this and that and getting nowhere. So if was flashing would be a immob fault if...

I'll guess I'll keep trying. I see you can get a immobiliser delete /bridge kit would this be any good atleast takes immobiliser out the picture. Or even install new ecu and all what goes with it. I have a old Clio mk1 and alarm light on dash goes out after second or two. The alarm light on the...

Hi I'll try that also open to all suggestions before I have take it Renault to see what it says on clip. Thanks again to all for the help keep it coming.

i pulled the pink coloured relays near battery tiny bit but swapped around. the guy i bought from had a look and he noted that immobliser red light is soild should this be im not sure having owned car short time. you turn key trys crank but no fuel pump priming, can hear relay clickig in foot...

Thanks all for replys. As you say I don't wan be changing all sorts done that with a Astra cost loads to get no where. I'll have a look at crank sensor thanks give clean etc check positioning. Was plugged in to diag machine said was fuel pump so I made up fly lead and pump works fine. But by...

If it was this fault it would still allow car to be turned over. Any one got a clip or like to try it for me I'll pay of course thanks

hi all first post ive just bought myself a 182 54 plate ive not had long but car has a fault wont start atall. ive looked in old posts but none sound like my problem. i can turn the key and will crank /turn starter motor but cuts out stops from cranking after about 2 to 5 secs. i presume...