Search results

Thread title changed to be more relevant!

You need to adjust the audio sync on the tv, you can only do it on the tv as you need to r****d the image / advance the audio. Some tv's allow you to do this, some don't.

those scratches should polish out with some metal polish.

or they ran out of pipes and had to make some up!

it no better than using your existing pipe and sticking a foam filter on the end, but will set you back a lot more.

At least you didnt give up :) not sure about the cutting of the filter, you sure there's not a leak now?

Make sure the top area of the cage is still all ok. Its normally a 1 to 2 inch wide bit of mesh that folds over the cylinder bit of mesh and the gets secured. provided its still in place and secure, it should be ok. if its loose, don't use the filter until you secure it again.

I would do something with the wheels (either spray them back to oe color or get the turinis like you said), change the green filter for a foam filter, and get a front splitter fitted. Other than that, I would just enjoy it :up:

Ok thats fine then, my test wont be a waste of time as I am only looking to read with the galletto at the moment (not brave enough to write)! :)

@chaski when you say they couldn't gain access, does that include read access? i.e. they couldn't connect at all?

right firstly you battery is way too far forward! So move that back as far as possible. if the pipe is being a pain to get into the filter, put some oil / grease on the inside of the rubber collar. It should then just slide in nice and easy. Also make sure the rubber on the filter isn't stone...

If that's the case, then really there should be a warning before you start the flash to let you know this. I know I dont have any problems using my ELM327 after using the RSTuner though. Like I said, I will have a god tomorrow if my galletto comes :up: hopefully shed some light on this!

I have a normal ECU reader coming tomorrow (GALLETTO) so I will see if I can connect / read from it all ok.

are you sure thats right? As you can restore your original backup which resets the software versions and offsets etc? Sounds like you didnt restore you original backup first...

nice work :smile: Is that a 70mm filter? If so it should work on my setup also (although it doesn't look that much bigger)...

yes.

when are you going to get some real screens put in on the right? :p hook them up to an android device and have them working for real!

Last day to vote tomorrow guys! make it count! :smile:

my mk1 is on 150K, but that's soon to be going to the skip!

yep :up: the pipe terminates at the acoustic valve so you cant get it wrong.

any of you on spacers suffer with wheel bearings going more than usual?

removed down to the acoustic valve, no need to remove valve.

also see this for my test I carried out (posted a few pages back) http://www.cliosport.net/threads/1-2-induction-kit-location-%E2%80%93-does-it-really-matter-a-short-article-reveals-the-truth.699570/ If you took the headlight out and focused the airflow directly onto the filter, you would...

what type /size filter is on the viper?

Good thing you didnt use my map then as that's a completely different software version than mine! Looks like you continued to program it anyway though?

contact me when your looking to do this ;)

yeah just plug an RST VCI into it an it shows in the main window... no need to get it unlocked.

what software version was on the ECU?

ah, bit far for me to pop over then! I'm in north devon :)

where abouts in devon?