Search results

Same here! Haha Thanks man, and hopefully, haven't found many in malaga orange on cs, its like the little brother to the inferno

Quick pic Taking these to be bored out very soon

Nah just slide them, needed a fair bit of force, all you need is a Phillips head to pop off the little holding pin things

I am yet to 'slam' it, but they are hard. Harder than usual and bouncy but of holds much better in the corners But I much prefer driving with them on, it feels closer to the road and more racy

Cheers buddy, side mouldings are easy, the rear ones slide to the front until they click then they just fall off, the fronts are held by a little pin like thing, pop that out and they do the same but sliding to the back

yeh man, hopefully they will! and dunno, the tyres are fat on there atm, but they are in great nic so would be a shame to throw them away if i got new ones, would get some stretch on there

small update. failed its mot last week, on 3 things, loose bolts on one suspension arm, exhaust leak, tie rod end. replaced the tie rod end, tightened the bolts and used gun gum to fix the exhaust leak. the leak is the joint with the cat and the center pipe. This is because i fitted...

That was my baby the other day

Try eBay mate, unless you wanna spalsh out on solid mounts, but I wouldn't bother

Before you replaced the rear beam did you have any problems with rubbing at the back then?

@MWright how do your rear wheels sit with the wider beam? and would they fit with some spacers on the front without rubbing ect

Little update: picked up my 15" bbs today for just over £50 very happy, great condition and plenty of tyre left :) (sorry about s**t photo angle) just gotta get them bored out and ill see how they look on the clio :)

Ahh sweet, I knew I saw this done before on cs just couldn't remember, now I do! The car looks great man I will start to look up and make calls round here And yeh I've the same offset Was It hard rolling the arches then? And I'm gonna go low anyway ;) Cheers bud

Hey guys managed to pick up a decent set of bbs from a bimmer for just over 50 quid the problems are, center bore (57.1) on a e30 and the offset whats the lowest offset i would be able to use on the clio and where would i go to get them bored out? cheers ben

Yeah I would say use the top of the box that the coilies come in to catch it all And so are the roads near me Haha it can be quite fun bouncing around tho And yeh, did you use best offer? And even if you did pay a little more there still cheaper than vmaxx

will they ever understand? ;)

they do indeed! and yeh i do like the standard 172 wheels, i would get them done in anthracite to match my bullets and maybe some cheeky orange renault logos on the centre cap, lol , but cannot find any close to me or for a decent price with postage and the rear bumper is something im...

should look good :) and yeh lol i will when i get some nice wheels, for the min these are a pile of w**k found some nice black bbs from a beemer, but the cb is way too small :/ boring would be the only option and i have no idea where to get them done

never too low! haha but seriously, ive put it high for the min to let the springs settle then ill lower it and get her all cleaned up and get some nice pics

the springs were alright actually, i used a socket wrench and fired them, the first into the air (not clever), the second into a box which held all the bits fired off i like the way they feel, been driving round today all fine, my road is a s**t hole so its a bit bouncy, gives me a better...

Haha I used so much, I didn't have a proper socket set either kinda used spanners and stuff, lol One of my rear springs had snapped, so I would have failed an mot anyway, I'll let you know about the ride and getting used to them

Update. Fitted coilovers properly today, did it yesterday but did the top mounts horribly wrong, but fixed them today and its all good only problem is i lowered it too much! and had to rush out to work got a few pics, will raise it and take a few snaps tomorrow

Well i managed to fit mine properly earlier, lowered it too much straight away and will raise them in the morning Youll have to do the same amount of work to use lowering springs, i didnt decompress my original springs properly, just kinda fired them into a box, with new springs and shocks...

You can get either a replacement rubber set Or they do solid top mounts, haven't looked into them that much but they give better feedback and stuff, but you can probably imagine for an increased price

cheers mate, i couldnt find anything! ill take a look tomorrow and see if i can get it working

cheers man ill check what ive done tomorrow too, will get a pic of the way they sit, its completely wrong! and yeh i bet they have, i just cannot find a single one :/ even in the guide section! id imagine someone did it for either these or the old rokkor /raceland coilies

its like big and little bros! but its looking good mate, the wrap youve done looks prefect, wouldnt have the colour myself, but its certainly eye catching and stands apart from all the black and silver n/s reps on here nice car :)

yeah, i would, but they are kinda on the car atm, its on axle stands so theres no pressure this is the set the fronts are what i cannot fit, the back i think ive done correctly from that picture i took the rubber bits off the old shock (only the rubber bit) toook the nut off the top of the...

but until i get a guide and find out how to fit them properly, i have no car -.- lol

haha yeah! all i need is a guide of some sort as fitting most of it easy as chips, just getting these top mounts sorted has confused me