Search results

Just test fitted my new set of 15" Pro Race 1.2 with Dunlop DZ03G tyres. These are going to be my dry set up and using Federal RSR's for when it is wet.

Anybody have opinions of the tyres. These will be for dry use only as they are going on a second set of wheels, as I have Federals RSR for getting to the track and if it is wet. The Dunlops are about £450 for four but the Marongonis semi slick are about £330 for four and the Dmacks are about...

I am getting a second set of wheels for my track car (brand new 1.2's) in white. I would like them in orange but Rimstock only do them in batches so a very long wait. Anybody have any ideas how much it would cost to paint 4 15inch wheels in fosus st orange?

I am after some slightly longer nuts for my wheel studs to make it easier to screw them on by hand. Has anybody used the Racing Composite R40 nuts? They look quite good steel nut with a separate rotating aluminium seat...

Had a bit of time today so made myself a new saddle for the Halfords trolley jack. Now I am getting a second set of wheels I will need to take a jack with me to tracks so it was either take my big sealey jack or this. I have never liked the saddle on these as it is too small so found some steel...

Has anyone got a bracket drawing or cad file for the brackets to fit some Wilwoods.

My clutch pedal started creaking when I was doing a trackday a few weeks ago. It started when the engine bay was very hot but the next day it had stopped. Is there a point that needs re lubricating?

anyone got any pics of the wheels fitted in 15" I have found a few but not sure they are 15" ideally with the wheels in white on a black car Thanks

I am getting myself a second set of wheels, but not sure what to get. The car is a track car but driven to and from the track. Currently have a set of 7x15 pro race 1.2 in anthracite with Federal 595 RSR tyres which will be used for road and wet and damp days. I am getting a second set for just...

Black not sure if it is a 172 or 182 with green mirrors and badge and green sidelights heading towards Shrewsbury

I am looking for a new pressure gauge but want one with a air release to make it easier to set the correct pressure at trackdays. I have seen THIS one and it looks to be the same as the sealey one almost twice the price SEALEY anyone using one of these or what do you recommend

I decided to remove my rear wiper today and instead of just using a grommet I decided to smooth it out. steps taken I sanded the lump off Blocked the hole off with some plastic and bonded it in to the back face Used P38 body filler to fill the hole sanded smooth Plastic Primed Filler...

Anybody got one, and do you think they are any good not cheap really for a bit of cloth with straps on. Was thinking of getting one for the track car as there is really nowhere to store the helmet to stop it rolling around.

Got my DAS 6 Pro last week with some Meguirs 105 and 205 with hexlogix orange and white pads, so I decided to test it out on the track car first as it had lots of surface scratches and swirls. Really pleased with the results looks like a different car now. I washed and clayed it on Wednesday so...

Had the alignment done today, I would have liked more camber but that was the max the bolts would allow. What suggestions would you have for the rear, is it worth shimming and would more camber be beneficial? It is a track car only being driven to and from track

I am not sure if I should get some polycarbonate windows for the front. I have spoken to a few people with them and get mixed views some say they are way too hot and don't let enough air in and others say they are fine, and there is also the issue of margard or not. My car is not a daily it will...

I have searched but cant find anything, has anyone moved the carbon canister to allow brake cooling, if so do you have any photos of where you moved it to? I don't want to remove it because of lights coming on and it possibly causing problems.

I will be replacing my ball joints in a few weeks and don't have a splitter. which type is best to use the fork or ones with the screw also I notice the fork ones seem to come in different sizes seen these two are they any good...

As I will be changing my inner tie rods in a few weeks I decided to make some tools as I did not want to spend money on tools that will only be used once or twice, or be struggling for a few hours. First is a old machine spanner that I cut the end off and as it was too big I welded one jaw and...

Here are a few photos from yesterdays rally at Epynt. Weather was awesome and it was a good day except for two bad crashes that needed two air ambulances, I heard today from a customer at work that one was his mate in a Darrian and he had to be cut out and he has a lot of injuries but should be...

I have got some new track rod ends and bottom ball joints but thought while I am doing them may as well change the inner tie rod at the same time. I have read it can be a pain to get to to undo it so I have decided to make a tool (like the ones that slide over the rod). Does anyone know the...

I would like to use pull straps on my CF door cards but can not find any trim pieces for a reasonable price like the ones in the photos. The CF ones are are £38 for just the trim bits and the plastic ones with the straps are near £70 :eek: streamline have a photo on their site with some silver...

Anyone used the sealey vacuum bleeder, I have a compressor so thought I may as well use it rather than get the easy bleed kit and mess about with trying to get a seal on the cap. I found one the other day for about £20 so just need to search for it again this is the one I was looking at...

Done a search but found conflicting answers. Does anyone know what thread size the front and rear bleed nipples are for the 182? M7 x 1 seems about right, found these and was thinking of replacing the standard soft ones...

Need a new front caliper (but thinking of doing the 2 for piece of mind) as the piston is not fully retracting so causing a slight drag, I have a 15% off voucher for GSF so looking at the calipers from them, by the time I have returned my old one and got the surcharge back I am looking at about...

not sure this is the right section. I am after a cheap indoor car cover for my track car, it is in the garage and the dust is building up on it and I have to keep walking past it, just looking for something to keep it clean and stop a big scratch appearing down the side. anyone got any...

I have some 15 inch pro race 1.2 et43 with 205/50/15 Federal RSR's, I am keeping standard cup shocks but putting cooksport springs on. ATM with standard springs I have between 12-15mm (measured with a fat finger lol) between the tyre and the strut. I am looking to run around 2.25deg of negative...

I got the car in October and a week after that the work started, including lots of phone calls ordering bits.:D list so far is Safety Devices 6 point bolt in cage Bimarco Futura bucket seats Bimarco Aluminium side mounts Pair of 6 point Sabelt harnesses Oreca 330mm steering wheel Flocked...

I have my ph1 indicator stalk and MOMO boss on my 182 but it is not self cancelling, is there something that needs to be done to it to make it work?

I am not brilliant with electrics so decided on another way for attaching the cruise buttons without taking them apart.