Search results

they are the ones i fitted to my 1.6 16v so they should fit a valver

some draft excluder(sp) around the part that meets the grill

http://www.caraudiodirect.co.uk/product_info.php?products_id=1535&cadid=7efe697fba1c30fe2e96112a578d8edfhere but it aint really worth the postage. any local audio shop should stock them

ditch the power cap asap;) 1800wRMS has got to be a good 175A taking into account effiency losses as long as its 0 AWG get a 200A ANL fuse

what size cable are you using? impeadance is just ac resistance. what sort of power output is your amp?

are you using a a trip switch instead of a fuse now? a 40A fuse and say a 60A trip with both operate at the same current are there any fuses on the amp??? are you showing the amp too low an impeadance?

Quote: Originally posted by nonos on 21 August 2005 as said, apparently they are a straight swap, but they wont be legal if you dont have auto-level and washer for them. you only need them if xenon headlights are factory fitted

http://www.autobulbsdirect.co.uk/product.php?productid=16381&cat=622&page=1£299

halfrauds or any local motor place they are pretty much standard

the negative lead will have a crimp on the end that will be seperate from the clamp for the negative post of the battery i wouldnt hit the negative post with anything as i believe they are made of lead and very soft

a brick a kerb anything the crimps are only made of copper so are soft god i sound like a rough arsed sparkie:D

get some 4 gauge cable get some crimps for a electrical wholesaler for 25mm2 cable and use a hammer to crimp it on

and the width is how far either side of centre freq is adjusted

if you dont know what you are doing id advise looking up how to first basicly it helps to adjust certain frequencies if they are too loud/quiet

you will be able to see on the front of the caliper (mine said lucas which i guess is girling)

9853:D

http://www.wheelworx.net/wheel worx

i have a sports cat on my car and the toxic fume light came on had the emissions checked and the guy in the garage said they were very low so it may have a sort of lo/hi level alarm which puts the light on

http://homepage.ntlworld.com/jonathan.thomas4/pics/subs.jpg built this box but aint finished it yet:oops:

id stick with getting comps instead of co-ax ones

45w from a hu is about 20-23wRMS as long as you dont clip the tits of the hu amp the speakers will be fine

Quote: Originally posted by 16vClio on 10 August 2005<FONT style="BACKGROUND-COLOR: #407db6">1.6 16v onwards IIRC matey..... depends i aint got them on my 1.6 16v:cry: [Edited by Dink on 8/10/2005 10:58:17 PM]

seems strange that the starter packs would have a side to be fitted:confused: if the starter keeps trying to fire across the lamp it will f**k the lamp aswell

might be around 400wRMS 4 gauge would be more than enough dont buy one on its watt rating make sure it has the cable csa (e.g 4 gauge as above)

http://www.autobulbsdirect.co.uk/product.php?productid=16434&cat=632&page=1£75

http://www.caraudiodirect.co.uk/product_info.php?products_id=204&cadid=053392bc94a9c947dab2a195537e17c0something like this

my front discs where held on by a T30-35 torx screws

yeah battery chargers can put out anything up to 16 volts

that is only an 8 inch sub so the box to go with it will not be that big (Recommended Vol.: 0.55Cu.Ft.) which is about 16 litres.

http://www.caraudiodirect.co.uk/product_info.php?products_id=3761&cadid=fad56b44fbb567bfc1967050948ab1cdCAD http://www.cel-direct.com/detail.asp?ProductID=3833cel [Edited by Dink on 8/7/2005 6:03:29 PM]