Search results

Looks stunning 😄

I have only seen the K&N one one for the D4F712 (I have the same engine) that has the adapter. One popped up on ebay for about 50 a few weeks back, don't think you can buy them new any more. Off topic from your question I am running a Pipercross foam filter and that helps give you more noise...

Found a couple places around the internet that seem to point to a Turbocharging pressure sensor https://www.meganeownersclub.co.uk/forum/viewtopic.php?t=18589 http://enginedtc.com/df004-renault-renault https://obdii.pro/en/code/DF004 https://www.renaultforums.co.uk/threads/df582-and-df004.400058/

I don't have a solid answer for you but worth checking https://partsouq.com/, I use it regularly to find part numbers

It was the 18 year old stuff on the car that was staining for me, good to hear it went well 👍

I wrapped mine in a tea towel, gave it a hard twist and the glue snapped (I did have a hacksaw ready to go but was lucky not to use it). I was installing a scenic shifter (+Stiff Shift) so cut some grooves into the gearstick rod with a hacksaw and epoxy'd a black Quaife knob on top (I think I...

From my experience doing it the door card is easy to remove but the butyl makes an absolute mess, I used WD40 and a plastic scraper to clean off the old stuff. There are little dot marks on the back to help you apply the new butyl back in place (if you are going down the full clean/replacement...

Ahh that's right! I had to change the gear linkage to accommodate a replacement metal bushing that went at the box end

This is the exact method I did for mine, realigning the gearstick afterwards is a PITA. I put the gearbox in reverse from the box and got my other half to hold the stick in reverse position in the car while I bolted it up (I believe the proper method is to space it out 2-3mm from the plastic...

Turn the wheels all the way to one side exposing the knuckle, crack out a ruler and measure from the centre of each bolt (assuming you are talking about Front Shock Bolt Spacing). Only way to guarantee the right one for your car. Unless somebody on here knows exactly it's your best bet. There...

I would reduce the brand down to 'So:' so that your range looks like: So: Wax So: Shampoo So: Snow foam So: Wheel Cleaner So: Interior detailer So: Fallout Remover So: Citrus Pre-Wash So: Quick Detailer Focus on the product and how good it is, simple. Otherwise pick some mental attention...

“Runs an drives mint”

I watched the vid because of it :LOL: The build is mental, great to see something different

Routine oil change, whoever recommended removing the filter with a plastic bag to catch the oil saved me a lot of grief today

197 Steering Wheel + Yanoo Scenic Shifter in my opinion changes the entire car. I only have a 1.2 but its so fun to drive

Thank you for the feedback everyone, seems like these will be going straight in the bin 🚮

Bought a set of alloys with some used R888s, two are flogged and the other two have reasonable tread to them (2.5-5mm) I'm going to repaint the rims and purchase road tyres. I want to ask those with experience with these tyres if there is any life left in this set for somebody? (16" 205/45)

I have used a battery shim on my negative due to the clamp being deformed with age. From what I have seen as long as you have the correct terminals/tools to correctly fit them you are good to go. From a quick search there is the large fuse on the positive terminal to be mindful of...

Thank you for the advice. I'm going for OEM rubber so fingers crossed won't be as bad as a poly' change. Knowing the bolt could snap it seems prudent to just replace it while the chance is there

What length (longer) bolts would you recommend? Going to do mine in a week's time 😬

Glad to see its not just me who has had this experience :LOL: I bought some cheap ones from ebay (as you do) and they did as you say, If somebody sees this and got it to work a purchase link/advice would be appreciated. I would imagine genuine parts are the best way to go.

Just to end the thread, 238mm was NOT the right size. 259mm is correct as per the manual -which I should have bl**dy looked in the first place. Have to make these mistakes to learn from them I hope... P.S. Such a pain when you find a thread on the subject you are looking into and the last...

I did mine a few months ago (Kit from CrazyLeds) and the Door Locks, central locking and heated windscreen button (assuming clio MK2) are 3mm (specifically flat tops in the kit). The speedo dials are PLCC-2's but the mileage read out had 1206's supplied (the CD player also had 1206's supplied)...

Resister suggestion from Dr Jekyll and 1812lsd is 3.3ohm. { https://www.cliosport.net/threads/airbag-light-a-permanent-fix-for-those-with-buckets-or-aftermarket-wheel.603613/ } At lot more sketchy than a reprogram but then a lot cheaper, I have seen quite a lot of people run resistors on wheel...

The real litmus test will be getting the wheels off and having a proper look which I won't be able to do for a few weeks at least. Will update with my finsings late on in case it can help somebody else in the future.

I'm with Filters on this, the addition of extra metal bars to the side of the seats in the frame make a world of difference to being "locked" into the car. I picked up the half leather full set for £75 with one cig burn mark on the drivers side - Some of the best money I have spent on the car. I...

Just after, tis' a 51 plate!

I believe it belongs to the first batch of PH2's in the UK (originally bought November 2001 a few months after the facelift) Image for generation reference, my own is a dark metallic green (will get some images up when I find time) - Same set up as image with the 1.2L 16V D4F Petrol with...

1.2L 16v 2001 (MK2) And wow that would be a lot of work, i'm not quite running low boost power... I have now ordered some proper discs at the right size and will fit the larger ones on my friends Mk3 (as they should be). I'ts reassuring to know that my silly proposition is indeed silly. Thank...

I have a mate with a MK3 so all is not lost