Search results

whats the deal with this then? they look like all they require is undoing the bolt and then the tubes connected to it. but presumably i would need to drain it first, then refill it etc? how much work is involved? would like to replace my gay plastic greenish one with this...

at a renault sport meet at demon tweeks today, still looking great dan, no changes made new owner is a nice lad too jamie

http://cgi.ebay.co.uk/Renault-Clio-grill-kamei-look-2222_W0QQitemZ140106399359QQihZ004QQcategoryZ72206QQrdZ1QQssPageNameZWD1VQQcmdZViewItem the grill part looks ok, the diamond looks shite jamie

ive had this spare for a while, just come to fit it instead of buying two new ones as im short of cash . . . was flat, put it on, went down over night. took it in and they say that the tyre cannot be repaired as the puncture is on the inside rim. this means it will get too hot for it to...

this is the pole where you screw in the spare wheel tools and jack. if i remove it, can i weld it back on again? thinking of putting a subwoofer in the spare wheel well . . . jamie

right i had an idea the other day, did a photoshop quickly and seemed to get a good response as well. i love it, but the question is, can it be done without doing damage to the wheels and making them unsafe? before; after; thoughts, opinions welcome, and also could some kind sole...

looked like you got caugh in the school run in the other direction, had a private plate, b3ky or summat i think i was in a blue cup-a-like jamie

was looking at this pic earlier, and thought, why not smooth the ridge out :S any ideas and comments welcome, do's donts etc jamie

can this be done? the screw that attaches my shock to my axle has sheared off, have angle grinded it so its flat now. can i just drill through it, making a new hole and just use a very secure bolt with locking nuts at either end? or is it a case of fittin a new axle and bolts? jamie

52reg 1.2 16v clio, from either breakers or new renault? need a new one as a bolt on suspension has sheared off :S thanks jamie

when i took it to have it lowered and Paul at RSTuning had a quick drive in it he said it needs a new clutch. i knew it did and has done for a while, but just havent had time to sort it out. just wondering how much etc? jamie

http://cgi.ebay.co.uk/Renault-clio-182-replica-inferno_W0QQitemZ330123009366QQihZ014QQcategoryZ10410QQrdZ1QQcmdZViewItem looks nice jamie

you were booting it up the dual lane part by hyde park heading towards town centre. taxi man wasnt happy ;) jamie

just had the hubcentric spacers through the post and have found that the fronts fit fine. however, the backs will only fit if you take the wheel bearing dust cap off. is there any way i can get round this? obv they cannot go on as they are as there is a 1-2mm gap between the spacer and the...

re the chat about new exhaust and not being able to find a recessed one; http://www.k-tecracing.com/show_product.asp?id=2385 not the best looking ever, but still and option, and could always fit the prospeed in it instead. jamie

at rs tuning leeds, having their remaps done, looked stunning!! also saw a 52 reg cup with a double zorst in halfrauds leeds, kirkstall road around 2 jamie

ok i know i have kept this section of CS alive over the last couple of days with different threads . . . . . but who cares :rasp: me and russ went over to blackpool today in the early hours to meet up with Ben aka jaffa182. this is the lad that first did the Blue led dash conversion and Russ...

just thought i would post a couple of pics that i took today. met up with russ to rid me of boredom after my s**t finals exam this morning. both had fks fitted recently and theyre starting to settle. russ' is going lower at the back, but is about right at the front. mine is high at the front...

today stuck in the headingley traffic goin in, about 2pm. you looked mighty pissed at the traffic! then saw a phquik shoot off down victoria road couple mins later, and a cup about 3.30pm out towards shipley. jamie

right, i have one of these http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=120118866991&rd=1&rd=1 and my engine bay looks like this (look at battery) so how the hell does it fit?? i have been supplied with two pretty small s**t looking...

shes lowered :) spent the day with Paul @ RStuning today, after watching Russ' FKs go on yesterday. here are the (slightly unfinished) results. i need spacers on the front due to the wheel being almost against the shock, so atm there is wrong camber on it. they will be arriving soon. then...

right guys and girls, here it is, the final decision, that i just cant make my mind up over. here are the two pics to wet your appetite; option 1; option 2; ok, so the car is lowered 2moro and will look as above in the next wk or so thanks to middo's painting skills (thanks in adv...

atm i have 5 X PH2 FF 172 wheels, with contisports on them. one obv being the spare. i am about to pick up a new set of wheels, then tyres, but only 4 turinis. my question is what do cups use for a spare, and if not a spare, do those "tyre fixing cans of glue stuff type stuff" actually work...

cheapest place in leeds for supply of, fitting of and balancing of the above. or is it cheaper to buy online etc then have fitted and balanced? jamie

can these be replaced and if so how much? jamie

i need a body shop to do my exterior handles for me, but obv i will need to leave the car with them since i cant use it without them on. so needs to be pretty close. anyone know any shops close as poss to leeds uni? cheers jamie

right guys and girls, i know how to get these things off the car (ie taking door card off etc etc etc) but once they're off how do you colour code them so they dont; a; stick the handle to the moulding so it doesnt move (so not a handle anymore) b; create a good enough seal in the lacquer to...

new style, in black, has the new silver grill pieces everywhere. my god the brakes on the thing were larger than my wheels!! looked like a proper monster!! spotted in, surprise surprise, alderley edge village as i on my way home. jamie

well i will be returning to homelands this wknd, and this happens to be Middos area as well :cool::star:. so of course i will have to pop round, see the sub, and give him some dosh to do some bits for me:star::evil:. but not sure what to go for. this is the car atm (coilies going on as well...

just bought a set of turinis, one kinda needs a refurb :rasp: lol just wondered how much 1 wheel would cost roughly? and would i be best gettin all done, ie colour match? cheers jamie oh btw, the link to the mullered wheel...