Search results

Replaced spark plugs, a little bit better but not perfect still. Can ht leads be the next problem? They don't seem to have any damage or cracking splitting what so ever. Now the car runs to an extent it's driveable is my best bet to find a garage with a clip machine? I really do hope it's not...

Going to pick up four new pfre6e's and see how I get along with those. In my haste to remove one of the injectors I managed to pull/snap off the electric contact so that warrants a new injector anyhow! Must be more careful next time!!

Well no difference with a new coil pack so that I can tell,going to put the injectors back the way they were and start again I think

Cheers, Managed to get them back in with a very small smear of LM grease (makes perfect sense tbh!!) So 3s now where 4 was ,its harder to tell the difference in the engines note now,not as discernable as before,so that point towards a faulty coil pack? Probably makes sense to replace that I...

OK so I managed to get 3 and 4 out with a lot of wiggling and without removing 1 or 2,question is how do I get them back in? Is there a special technique? I've tried pushing them back in but due to the size of the o ring looks like it might need quite a lot of force,should I take the whole rail...

Hi guys, Engines misfiring this morning with yellow engine light flasshing , I've sprayed some wd40 in coil pack contacts as thought it might be water from all this rain,no difference. Took the plenum off and checked the spark plugs ... from the left looking​ at engine bay 1 is fine , 2 and 3...

OK So i've learned that there's only two components being the inner coaxial rod thing, and then the track rod end which attaches to the hub, both parts have I have manged to source, Though i have another question, how do i measure the length of the inner tie rod. Looking down, you have the...

Morning chaps, Been searching the forums ;) for an hour or os and seem to have whittled down a parts list for suspension items as follows but getting confused on outer track rods: Inner Tie or track Rods - 7701473656 (~330mm length) Should be able to get from motor factors and not renault...

Is that suitable for the ph2 rs2 clio? If so they seem a right bargain (don't know the cost of oem from renault) and mine could do with a refresh as theyve done well over 40,000 miles with me and countless more on the previous owners!

Oooohhh think I'm just going to have to get a decat for the time being and decide what to do in the meantime, as you all say it is rather pikey to cut the end off!

The outer dia of the scorpion systems is 2.5" isnt it? http://www.ebay.co.uk/itm/Exhaust-Pipe-Connector-Sleeve-Joiner-2-5-63mm-ClampOn-/320514891003?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa02d1cfb I've heard the flange joint can become loose and blow? Arghh this is such a...

Hi , Im totally lost as to how I will fit my newly purchased catbak RS192 exhaust to the cat considering it has had the lip part cut off and replaced with a straight pipe being 2.5"? Without having a buy a new cat is there anything I can do to fit the scorpion silencer to the back of the cat...

Haha right lets be serious! Say if im in 2nd and back off moderately accelerating per se if you were exiting a junction I can here a sqeak from under the car, this might also happen in 3 and 4th. Theres no clunking noises so I don't think its an engine mount issue ( bit of movement in engine...

Water pump? Someone else will need to confirm this but i've heard that these obviously are easy to change once you have the engine apart when doing the cambelt

All im gonna say is... Tyres gonna be expensive for decent rubber!

Doesnt the manual say usuable 50? when my fuel light comes on it usually takes between 43-45 litres to fill up, going on about 5litres of reserve fuel in there?

Ha, i thought i saw someone waving arms like a loon in a blue clio , lol! My door got creased backwards past 90 degrees, don't ask how, rather embaressing! So now im sporting a dark blue 172 door that has a keyhole it shouldn't have! Should get it resprayed after christmas , and yeah the...

What kind of wheels, standard 182 black ones? If so that was me :P Im always in town on a saturday, though if you saw the other side with the dodgy door you might think twice :P

That would be me, had a slight incident with a railing! will be respraying after christmas hopefully! too skint at the moment! :banghead:

Random question about Rstuner... or a more pointless one but, can you program it for Mpgszzzz rather than power.. ie having it return more economy during the week then ramping up the power for the weekends?

I've seen this car driving round twells quite a bit recently... just yesterday i was waiting for a car to go straight over a roundabout in order not to cut it up (car approaching from right) and that blue 200 whipped round the side of me and crossed the roundabout , few seconds later and he...

http://www.youtube.com/watch?v=NFEqcnU1E7w Have added a video of the noise... between 12-14 seconds you can hear the pitch .. thats the odd noise

Yuno what... that might just be it! I posted a thread a while ago...(but im sure its not the exhaust as the noise is definetely coming from the engine bay) http://www.cliosport.net/forum/showthread.php?573193-Help-with-bolt-size-in-engine-bay-on-support-rod&highlight= Does this look like it...

Hello chaps... Under the impression that the dephaser will need changing at some point as I dont think its been done with the cambelt but it doesnt sound nearly half as bad as some of the youtube videos you hear but I digress... When slowly revving the engine (from warm) to around 4000rpm and...

As you can see by the picture below...(just below the green wires) there is a bolt missing from this silver rod that comes off around the alternator and then attaches to the engine block. Would like to bolt this back together to secure everything back up! Thankings in advance...

Was a breeze at the local garage, they had recently bought a new pressure bleeder and tested it out on my car. Connected it all up and bled the rear right then front left... both of these lines had brake fluid coming out like foam! after a bit of bleeding on all four wheels jobs was a good un...

Bought a eezibleed earlier and 5L of brake fluid but to be honest I'm gonna drive it to my local trusted garage ... Fortunately I can take single track roads all the way there bar the last 100m on a main road the onto ind. Estate Gonna watch how they do it to learn a thing or two and then...

An update.. (btw I live in east sussex near crowborough) It would seem there is air in the front passenger and driver side rear system as the other two diagonal wheels lock up when braking is applied.. ive been told most modern cars have two braking systems incase one fails... I don't...

Hello, Just been bleeding the brakes.. a few mistakes to start with (was using the 2 man pumping method whilst maintaining the tube off the bleed nipple under fresh brake fluid to stop and air being drawn up into the system) Didnt open the reservoir cap when i started bleeding the brakes...

Ohh thanks that would be mine :D Got in a habit of parking there now my brother just got a house there , 2 hours free parking n a 10 min walk to town so it's quite convinient Gave it a wash yesterday but no polish :( still haven't bought any along with wax and there's a lovely pillar...