Search results

I dont mind at all... go for it

If you can drill from the inside of the bumper you could use a hole saw (some times called a tank cutter) the are available in all sizes.Although it will give you slightly more than a semi circle as it uses a drill in the center, you could straighten that up though.

I get this too... it was so bad once it left a mark on the end of my finger... A simple solution though is to hold onto a metal part of the door like above the window while stepping out of the car (keep hold until you foot is on the ground)... this will discharge you without any pain.. rather...

I got one last time I was in france... cost me about £6 ... its a V6 too :oops:

running lean or rich is all to do with the air/fuel mixture... if a car is running rich it is running on a mixture containing more fuel than it really needs.If it is running lean the amount of fuel in that same measure of air is smaller. Running lean can cause detonation in the cylinder...

:) okey dokey...... I guess I could sell a few as I dont see myself using 10 too quickly ...... Thanx for the info

lol no totally legit... I might go for those then... it might make me change my oil more often.... do oil filters deteriorate if kept too long?

does anyone have the part number for a 172 MK2 oil filter... Ive been offered 10 filters for a fiver... the part numbers of the filters is 82 00 033 408 .. Im not sure exactly what they fit though.

oh and next time tell him to touch in the chips with a match stick cut into a point... the brushes tend to add too much paint..

try using a bit of T-Cut on them... dont rub too hard though other wise youll be through to the undercoat... polish the area afterwards as the t-cut will remove any polish that is there...

If they did the tracking as well that would probally account for the different handling as well... especially if they adjusted it very far... its suprising the difference it can make.

I had some of those Eagle F1s put on the back of my MR2.... also from Micheldever.When I was driving back I was wondering if a wheel had been left loose or something because the back end felt boaty.It was purely because they hadnt bedded in yet.A 100 miles or so and they were just fine.I also...

You can buy some decent adhesives for plastics ... most of them tend to semi melt the plastic to bond it together.I would get in touch with a plastic supplier see what sort of bonding glues they are using...

probally the speedo cable or speedo itself, as its a cable rotating inside a cable its probally catching up somewhere..

if you look closely... it had gold alloys on the rear and silver on the front..

nope not photo shop... the wife spotted the car while we were on holiday so I had the cam with me...

Oops here u go... http://jet301.faithweb.com/baad.jpg

Saw this in a service station.... Max Power stickers on the back and everything. <BR><img border="0" src= "http://jet301.faithweb.com/baad.jpg"> I dont know if its had a shunt or its just badly done.

Hey tom.... did you pay my car a visit in the middle of the night or something?? .. it was the oil seal... absolutley soaked the clutch.The cars back now and it feels TOTALLY different... the bite point is a lot lower on the pedal and the clutch is a lot more aggresive now... I think it felt...

You should be able to find a supply that works when the ignition is on from the back of the fuse box... like the radio... watch out for the fuse size though... I would take the supply off of the fusebox from the supply wire to the radio (the wire thats live when ignition is on) before the fuse...

whenever I wash or polish my car I only use the sponge/cloth in a straight line from the front of the car to the back... not in circles.. a valet guy told me to do this... it stops all of those cobweb looking scratches you can get... you will still get them as you are scraping a sponge across...

Hey thanks mate... Ive seen them 3 times at the end of my road within a week

Hey all ... just a quick Q ... what are the police transit vans that sit on the side of the road with cameras sticking out of flaps at the tops of the rear doors.Are these for tax or speed? or something else... only reason I ask is that I saw 2 of these today but they were both parked on bends...

Arrrrrrrgggggggggh !!!! Renault have just called me... they want to keep the car for another 3 days... they have already had it 3.. apparantly they ordered the wrong clutch for my car.. :sick: it looks like Im gonna be punting around in my wifes pug 205 AUTOMATIC ! :devilish: for a while...

I went past one of these in my wifes car.I was actually on my way to get a tax disk as it was about to end (the next day) I was wondering if I would recieve something in the post as it was about to run out.... I drove past it again with the new tax disk.... they had a van at each end of the road...

Ok the car went in today... the renault engineer drove it down the road for about a mile (with me) and he said he could feel it slipping in every gear... I only really noticed it in 4th and 5th... more load I guess.I asked him if hes had any others with this prob.. and he said two.. both on an...

I came across this link today... and I thought it was soo funny I just had to share it... Sorry its TOTALLY off topic but ... ;) http://www.reyndogg.com/video/Group_X_video.swfhttp://www.reyndogg.com/video/Group_X_video.swf rated pg13 so be careful :p

Danny... my cars going in to renault next week because my clutch is slipping at motorway speeds.... If I stick my foot down to overtake the revs shoot up and I dont go any faster... the cars only done 4000miles... I dont know why a brand new clutch would do this but for some reason it is. The...

Ok Ive booked it into Renault .... Ive asked that a mechanic drives down the road with me so that I can show them whats happening... rather than just being told we couldnt find a problem

Lots of autosol (alluminium polish) and elbow grease... it doest take as long as you would think.Or just take the part off and get it buffed...