Search results

Anyone else noticed this on fleebay ? http://www.ebay.co.uk/itm/Clio-172-182-Race-Pedal-Box-Brake-Bias-Adjuster-/300591223566?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item45fca2130e#ht_500wt_922

Just wondering who has aero-catched their bonnet in four places to allow the bonnet to come right off ? as im planning to do so just for the fact that the car will be getting itb'd soon and it makes it easier to work on with the extra space and light that can get in Below is a link to daz's...

What vin vf1 do i choose for a 2002 172 cup ? there's options for cb20 , cb21 and cb22 And im guessing i only i choose the eobd module Any help would be great cheers

As above i can get my hands on an itb set up with jenvey bodies and the ktec Gen90 Ecu set up for around £1750 and run between 195 and 200 bhp and have a much improved torque and power delivery or just get matched inlets and an rstuner and have a power figure around 175bhp and a slight...

Anyone know the rough costs for a standalone ECU and engine loom to suit as i need something to run my jenveys cheers

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250858804961&ssPageName=STRK:MESELX:IT#ht_720wt_1141

Last night i drove my friends rallye which he has kitted out with a satchshift device and it is a brilliant peice of engineering , i was wondering if anyone has developed a similar system for a clio or would be intrested in doing so ? For those of you dont know what satchshift is its a...

http://motors-parts.shop.ebay.co.uk/Car-Parts-/14239/i.html?rt=nc&Manufacturer=Renault&_catref=1&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_fln=1&_ipg=&_ssn=6015jc&_ssov=1&_trksid=p3286.c0.m282 Anyone seen these before seem slightly pricey but i imagine there would be a good weight saving ?

As above on ebay http://shop.ebay.co.uk/melonplec/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

Im sure this will be a repost from quite a while ago but anyway it sounds awesome.

Can anyone recomend the correct gauge , thickness and brand of cable ? cheers

Is it safe to remove the black adjusting mounts and allow the spring to sit on the threaded mount instead ? thanks

As above please take a look http://shop.ebay.co.uk/melonplec/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250843169381&ssPageName=STRK:MESELX:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250843165600&ssPageName=STRK:MESELX:IT no reserve on these two

Will this be ok ? , as i want to use my coilovers and my brembo 4 pots from my non sport on my sport thanks

Hi everyone ive had quite alot of problems trying to get my f4r engine non sport to start , it cranks fine but on ignition the fuel pump wont prime , i tested to see if i can get 12v at the fuel pump and coil pack and it doesnt seem to be getting power at either , so im putting it down to...

My fuel pump isnt priming on ignition , ive ran a direct feed to the pump and wired in two different plug ends so ive ruled out pump faults and plug faults , which relay is for the fuel pump ?

Hi everyone went to start my f4r'd non sport ph2 clio today for the first time and it wont even crank , the dash lights up and the small immobiliser light in-between the stop and service light is flashing/allways on , i got the ecu , uch , key , decoder ring and clocks all from the same ph2...

hi there im currently fitting an f4r engine into my non sport 1.4 16v which has electric pas , im using the volvo aux set up , and cannot use my electric power steering as the sport interior loom is not compatible with electric pas , can i use a sport column with my 1.4 16v rack ...

Any one know a good engineering company that can make me some brackets to allow the willwood four pot brakes i bought to fit to my non sport hubs ? cheers

Anyone else's omp subframes sit the seat quite high ? , i need mine lower :mad:

hi there i was wondering where i can get hold of the parts needed to do this will renault still stock them ? heres the part numbers 7700718613 8200031832 7703101094 7703101073 thanks

Ive had a quote of £100 to spray my rear bumper in pearl black ? is this a good price ? cheers

How could i do this , i have a phase 1 engine with a cable body but i need to run a phase 2 engine loom and ECU thanks

Right i need a few answers on putting a 172 engine into a non sport I have a 172 engine , gearbox , ecu , engine loom , radiator etc out of a ph1 I have been told i can use my standard driveshafts and wishbones but i need a sport subframe is this right ? Also ive told i need a ph2 ECU...

Hi can anyone tell me the difference between the sport and non sport subframes thankyou

hello i purchased the short-shifter out of the for sale section which came yesterday fitted it and after fitting the gear selection linkage dropped to the floor driving up the road managed to tow the car home and cable the linkage up , i found that the cir-clip that holds the nylon coupling that...

Now before you give me abuse about it not being necessary im runing a k4j engine with custom angle works inlet manifold , headwork and de-cat , checked over the brakes the other day and found the front pads are low so was wondering if you can get brembo hc discs and Ferodo ds pads for a non...

hi i was wondering if there's any difference from the clio 1.2 16v front hubs to the clio 1.4 16v hubs as i need the drivers hub desperatly thanks very much

Hi does any one know if the ktec top engine mount would fit the k4m engine (1.4,1.6) thanks