Search results

Finally found the motivation to give the car a good going over and thought it looked quite nice so I thought i'd post some pics. Nothing special just thought i'd share. Comments welcome as ever :).

53 plate I think. Flashed me coming from attleborough towards the town, was about 2.45 on my way back from work. Anyone on here?

Firstly apoligies for the pics as there off my N95 but they'll serve the purpose. Right, presently at the moment i've got silver badges like this: But i've also got some (thanks Al) original black badges like so: And i'm stuck with which ones to go with? The silver ones looks good (imo)...

Gone from these: To these: Same wheels, Oz Superturismos. But one of the anthracite set was buckled so I thought i'd go off at a slight tangent with this set. What do we think? I know the turini brigade won't like them but I love them personally. :evil:

Dropping some bits off at laptab in Brum ??? Was the lad in the black clio dropping some wheels off who gave you the blankest look in the world, sorry about that never really clicked on until you'd walked off! :o

Did your car pass its MOT with them in? I'm fully aware of all the legal stuff in relation to these but i'm sure i've read thats someones car passed with them in. My MOT is next week and I don't want to end up paying for two, i'll just put the standard halogens back in and get the MOT done then...

One of mine is shot and the noise is really starting to wind me up now so I want to change the ARB bushes. Now judging from how stiff the powerflux bush in my dogbone mount is I think i'll be better of using standard bushes unless anyone has tried the powerflex? Had a quick look at the haynes...

Say you pulling out of the craft centre thingy by the coton arches this evening about 17.30? Was heading towards attleborough as you were pulling out. I'm sure I reconise the plate.

Just got this today off Harry_manback and cracked on with fitting it this afternoon. Will have to get some vids but the noise it makes is awesome!, anywho i'll let the pics tell the story.

Got bored this afternoon so I thought i'd pop out and try and find me a new desktop wallpaper despite being rather dirty. Ended up with these: ^ Token xenon shot :rasp: So what do we think? Comments welcome.

Car is fitted with a 40mm apex kit but the drivers side front seems to sit about 10mm lower than the passenger side. If you look up the wheel arch when the car is on the ground you can see the rubber insert in the bottom of the shock is about level with the start of the turret. Whereas on the...

Righto new pads and discs time, might as well go with uprated stuff. Anyone got any experiences or recommendations ?

Fancy an oil temp gauge so I know when the engines warmed up properly so it can have a good lump of cane. Obviously the K4M doesn't have an oil temp sender so i'm going to have to fit one somewhere. Looking at whats avaliable on demon tweeks theres a couple of options, one is t-pieceing off...

I've changed my rear dogbone mount bushes for the uprated powerflex bushed which ktec sell and whilst gearchange is much better and engine movement is far less i've got one problem, vibration. When the engine is idling the whole car vibrates, pick the revs up slightly and its fine. Basically...

Started the year with the old 1.2 bus, stayed standard but did have climate control which I miss now. :dapprove: Then in march I felt the need for more speed so chopped the 1.2 in for this. Then came Ph3 wheels. Then it took a dislike to its gearbox, cue weekend in the garage...

http://www.cliosport.net/forum/showthread.php?t=190259 Leading on from that thread i've taken it to another place who have told me that because its lowered i've altered camber, caster etc so they can't touch it as the values they have are no longer the correct ones due it being lowered altering...

Right my wheels/car currently look like this, crap picture but you get the idea. Now due to one of those being every so slightly buckled i've got another set of SuperTurismos (those same wheels) that are currently silver, not feeling the silverness so i'm going to get the powercoated but what...

Right car hit a curb hard enough to bend a wishbone a while back obviously sent the tracking majorly on the piss, had it done no problems drove straight as an arrow. Put an Apex 40mm kit on it about a month back and no matter how many times I take it back to the tyre place it just doesn't seem...

When I first had the car I noticed that when starting it from cold it wouldn't run the cold high idle instead it went to the normal warm idle which although not a major problem is hardly ideal. It would run the cold start mixture as you can smell it. Back when the stealers weren't being...

Trying, and trying is the word to change my clutch cable except I can't get the old fecker out!:mad: Its being held by two clips where the cable comes through the bulkhead and I can't get them to release the cable. I must be doing something wrong as it took me about 30mins to do on my old 1.2...

Seeing as i've got a buckled wheel and i'm not confident i'm going to be able to get a replacment could someone photoshop these wheels onto my car. Superturismo WRC Superleggras I'm not sure that the white won't be too constrasting on a black car, and i'm not sure how the superlegs will...

I've got a buckled wheel so I need to buy 1 Oz Superturismo 15x7 in Mk2 Clio fitment (100PCD ET37). Any places online that I should be looking?, not finding much the cheapest price i've found was £133 and halfrauds can get me one for less than that!

What is needed ? Anything other than the bumper ? Just thinking of a temporary measure while I get my bumper resprayed so i'm not car less.

Am trying to order a brake guide pin set for my car and have stumbled across a problem. Using the version of dialogys i've got i've pulled up the part no 77 01 207 961 for the kit, rang the stealers and they're priced at £17 but apparently there for a twingo???. They've given me another part no...

My birthday is coming up and the rents keep asking me what I want so might as well sort the suspension front out. Just unsure of whether to go for a kit or just springs. Only want to go circa 40mm or so and i've narrowed it down to either some eibach sportlines or an Apex 40mm kit. Which...

Ordered some Osram silverstar H1 bulbs from powerbulbs to upgrade the main beam in the clio, but on recieving them i've since found out i've got H7 main beam bulbs (so are the fogs) ??? I was under the impression they were H1 bulbs. Powerbulbs website says there H1 too which I why I ordered...

Righto, have these wheels. There Oz SuperTs in 15"x7 @ ET37 so they are the right fitment as far as I know. But the tyres are trying to eat the rear arch liners ? Now the suspension does settle lower than that but still they should never rub on standard suspension surely?, was about to drop it...

http://homepage.ntlworld.com/pih.01/curb_wheels/ Going to be taking them to lap tab to be refurbed but they couldn't say whether they'd be repairable without seeing them. What to people think in their experience ? Its that divet in the first wheel that worries me.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=020&item=300043510278&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=020&item=300043510823&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1...

Right i've had my passenger side airbag and seatbelt pretensioner fired after hitting a curb, the question is do I need to replace both the side impact sensors or just the one on the side thats been triggered ? There the sensors that are mounted on the side of the car under the seat. The...