Search results

https://www.renaultpartsdirect.co.uk/parts/engine-parts/renault-clio-172-182-alternator-7711134267/ According to this yes. The only one that is different is the Cup as that is 75amp.

Reading your other thread about the drain of the battery I would guess the issue is related to that. Alternator would be my guess. By sheer coincidence a month after I retro-fitted cruise my alternator gave up.

Was that a replacement stalk as well and If so did you have the same issue with the old stalk?

Just out of curiosity did you need an additional brake switch?.

@DomP182 This is the guide I used https://cliosport.net/threads/how-to-remove-airbag-steering-wheel-all-stalks-steering-casing-and-squib.588775/

There is a guide on here to remove and replace the squib, I will see if I can find it.

I didn't buy another loom, sorry not 100% sure on the wheel as I have the OMP wheel now. But looking at it it's straight forward plugs. The grey plug is horn, black one is cruise I would say, and obviously the two air bag connections. Do you have the loom for the clutch switch?

Have you tried the ESP/cruise switch and not got the SET and lights?

👍 Get a Snappy Retrim on the wheel😂 I had mine re-trimmed six years ago and it still looks like new. Although I now also have the OMP wheel.

@DomP182 I bought the Cruise switch panel second hand for £15 as no longer available. The clutch pedal switch I would just buy new for what they cost. unsure of a price for a squib. @Inferno182 do you have any parts currently for sale?.

@DomP182 this is the brake light switch I have, Part Number 7700414988 https://www.renaultpartsdirect.co.uk/parts/brake-parts/renault-clio-172-182-brake-pedal-switch/

@DomP182 just taken mine out for a quick drive to check. Cruise does turn off when I brake and I have to resume it on the R button. I did replace my brake light switch in 2019 due to a faulty switch. Will look for the part number later, but I am sure it’s just a standard brake light switch from...

@DomP182 no problem. I didn’t purchase a brake switch and mine works fine.

@DomP182 Just Checked for squib and where I bought it from don't have any now. But the part number I listed is the one I searched for. I would say yes regarding the esp.

Hi @DomP182 , Yes I would say so regarding wheel. Also like Martin says you need to cut the airbag for switches to fit. I purchased my squib new from ebay which came from Germany. I will see if I can find the link. Sorry I don't know regarding esp but I don't think you will.

@DomP182 I retrofitted cruise to my 53 plate 172 earlier in the year. The first thing I done was buy a second hand cruise switch like your photo to check that I had all the required wiring in place. (Photos Attached). To check it works with ignition on press the switch and SET should come up...

@RustyMojo Looks a nice example. A new Positive battery terminal would be a good addition https://www.renaultpartsdirect.co.uk/parts/exterior-parts/renault-clio-172-182-battery-positive-terminal-cover/ Are you sticking with the induction filter or going back to standard Filter? Good luck...

Search Snappy wheels on here. I had mine retrimmed and it’s quality. Not sure of price now as mine was done in 2014

This is what I have. It's a Volantech panel with cruise and speed limiter. The red buttons are for horn. The boss is a momo one. It's best to get a specialist to turn the airbags off on Renault Clip, saves having to use resistors. Wheel was from YB Racing. I think it's a Targa 330mm Diameter.

Ordered yesterday at 10:20 am and received today by 7:20 am, can't get much better service than that.

Just ordered four from Renparts. Don't currently need them but will be good to have spares. So many parts are difficult to get hold of now so trying to build up spares.

So far all good. Fitted last May and used on track without any problems. Also know of another track car using the same pump.

I was told they are not available new so I bought the same one as you have bought last year.

@1985michael182 Can I make a suggestion regarding the pump you have linked. Keep the original Renault Grommet for the connection between pump and Washer bottle. This is only through experience as I couldn't get the supplied grommet to seal. Ended up ordering genuine Renault Grommets. The pump...

This picture shows part of the bottom air filter bracket. Bottom left of battery hopefully you can see one of the bolts. By the way nice to see that you are rescuing the cup instead of breaking it.

Two bolts hold the long bracket on. Hopefully the front bracket is still there. Mine was missing the rear bracket when I bought mine and sod's law that was the only one that Renault had discontinued.

@Danboy66 This is where the front one attaches. There is a third bracket underneath which bolts under the battery to the battery tray. Hope this helps.

https://bimarco.eu/en/fia-seats/11-477-bimarco-futura-seat.html Some dimensions here, I have the Futura's and find them very comfortable.

Great effort especially doing it on axle stands.

@Dr Jekyll That's very true. Mark has cost me hundreds over the last few years with ideas or upgrades for our cars.