Search results

Re: My Phase 1 ITB Daily Runner Michael, I would like you to answer my questions in order to justify your comment of "Piss Poor" calibration. If this is your factual assesment of the calibration, please can you tell me were the car was running "piss poor"? The point is, if you have made the...

Re: My Phase 1 ITB Daily Runner Michael, OK I will look in to that for you. Sean.

Re: My Phase 1 ITB Daily Runner Michael, There is no problem with showing you the amendments, what do you mean by this? You had reported to us the changes where dramatic! The calibration side of the business is just that, a part of it. What if we had have made a mistake? Faulty sensors? New...

Re: My Phase 1 ITB Daily Runner Michael, I am not quite sure what you are trying to say in that post, but I am quite certain I do not think you are ignorant. All I seek is to understand what quantifies "piss poor" mapping and how this was affecting the car. Our dyno computer saves all our...

Re: My Phase 1 ITB Daily Runner Michael, It is clear that you are seeking to discredit our mapping abilities, based on, what I would suspect is perhaps a lack of experience and a reverberation of others opinions, rather than your complete understanding of engine calibration. The changes made...

Re: My Phase 1 ITB Daily Runner As it is a public forum Michael, it is my duty to respond where the reputation of K-Tec Racing is being brought into disrepute. In this case it is you making these comments to which I too have the right of reply. I will exercise this, within the rules of the...

No worries, its a shame you're so far away as we would be happy to get it fitted correctly for you. David.

It's not the strut moving Trevor, it's the bearing in the casing, so no chance of any damage to the strut, especially with the spring cap installed this time!;) Should be getting yours on their way tomorrow, will give you a call as promised. Sean.

If someone has an issue with one of our parts we will look into the problem. If you did not receive an answer I can only assume I did not receive or see the question. How long ago was this exactly? If the centre is not fitted right the rear of the box could sit high (in your case touch the...

They all come out of the same jig and having sold literally hundreds of these we do not seem to get many fitting issues. The ones we do see that are hanging down have simply been fitted wrong and need a simple bit of adjusting.

Re: My Phase 1 ITB Daily Runner Michael, I hope you can understand my getting involved in this thread, I am pleased to say we have done a great deal of work on your car. What I cannot allow to happen in public forum is your continual bad mouthing of our mapping here at K-Tec Racing. We pride...

If the centre section is not fitted correctly it will throw out the alignment of the rear box. We have never had one leave us fitted that low.

You should not need to cable tie or cut and weld any brackets to fit the system correctly. It will need a simple adjustment and thats all. Simply slacken the bolts in the centre and rear hanger, push the bolt up you have just slackened and the system will go up with it. Tightent the bolts and...

John, We would be happy to investigate this for you, as we fitted them, we would need to replace them under warranty if indeed they are found to be faulty. Please give us a call to book in at a time to suit you. We of course offer a parts and labour warranty on all goods we supply. Sean.

Changing the camber should not make any difference to the top mounts. The angle between the hub and the shock will have changed but not the angle between the top mount and the shock. I would first check your suspension and make sure everything is tight.

No its no Bilstein kit, we sell far more then they do :o

Exaclty but you are going on price and by looking at that first you are assuming a kit is thrown togehter on the cheap. I am pleased to say that our KTR kit is now by far the most popular on the market and its quality is higher than many more expensive kits. But as you quite rightly say it is...

You are right when you say that the best costs. We are working on some suspension with Nitron and the work involved is amazing. But just because a kit is sold for around the £300 mark does not mean it is thrown togehter. With our kit, for example, we have 100 kits made at once so this allows...

Absolutely nothing to do with us or our kits. David.

You seen to have been given some incorrect information. For £2.5k will supply and fit the kit and set up the car on our dyno with a custom map. Our standard base map is so good that the fine tuning of the map on the dyno takes around 15 minutes and in some cases no fine tuning has been required...

Cal182, We charge £120+VAT to fit and Laser align the kit to your specification, you should be looking at around this figure. I am sure you will be more than happy with them! Sean.

This exhaust has clearly not been fitted correctly. Slacken both the centre exhaust hanger and rear box band, push the system up higher and re-tighten. As the system rises up the hangers should rotate around the rear box and centre section, then once tightened the system will hang higher. It...

No worries Michael. David.

Of course Ryan, just PM me the delivery address. David.

We have plenty of pad and disc options available should you want to spec a specific kit. If you would like to go through the options just email me at info@k-tecracing.com David.

They are just rings of foam that slide onto the trumpets and sit behind the filter to stop it sliding down. We have just found out ITG sent some of the first filters out without them so if you need some just give me a call in the morning and I will get some posted to you. David.

Thank you for this feedback guys, we are soon to be looking at a super quiet stealth system with more of a bias on sound rather than performance. Quality wise we are very happy. We have very, very few issues and all our systems come with a lifetime guarantee which we would not include if we...

It will most likely be due to the fact the cat has not warmed up. David.

Our car never blew up :rolleyes:. It is still being used today on the same set up it has always had bar the Pipercross filter, in which they used very poor mesh despite assuring us it would be fine. We found some of their mesh in the cat :eek: but the engine was fine, amazingly. The new...

If that is the case then it cannot have been fitted correctly. It is such a simple system to fit but most garages do not adjust the rear hanger correctly. We have just had a customer come to see us with a system that had been fitted by another garage, we had to take it off and refit again and...