Search results

theres a poll some where , exaltos and goodyear f1 somet like gsd3, both are about equal just some ppl prefer one to other n other way round. costco card will set u back about 15-25 quid if u need one , and if yer mates got his own buisness can get one that way

alot of ppl are gettin this thin cable , shops are selling it for amps , but for me id use the proper thick stuff,

costco is like a whole salers , but they allow loads of ppl to join , some times just cos u work for a certain company , but if u have a mate they can add u too. but when i went was somet like 80 a piece for tyres with the fitting included , again had to wait a few weeks though

yer ive been to power flow in leeds for my magnex aligning , few of me mates have had zorsts done there , fella that does em seems allright , and he knows what he`s doing. just make sure when they do a decat pipe u get it with the ends that can be unbolted, and not welded onto yer system

WHEN U CHANGE THE AUX BELT U NEED TO CHANGE THE TENSIONERS OR SOMET . where are u based , sure some one could recomend some one on here , mine was done by mattblack last week he`s near manchester/blackburn mike @ rentech is down south

it normally deletes the setup files .

depends on what grade yer cables (max they can take) are as to what size ends u get realistically a self tapper in any part of the metal should be fine

not been funny or owt , but u know u need the headlights on , then open the glove box light is enabled, if the headlights are off opening the glove box wont turn the light on if not check the bulb :)

if its in boot theres some big screws goes into that bar behind seat , if its under seats just find some nice big bolts like the ones that hold the seats down :)

have u checked yer oil etc recently , if its siezed the engine wont turn at all

has this happened to cars with a uv / heat protection windscreen , or is it just on the cups

do a search , u do use the rubber ends from the old shocks on the coilovers , (the bit that sits under the actual mount.

whats the milage of the car and where the noise coing from roughly (which side of engine)

yer the fella , had his own company , and would either build a custom box designed specifically to fit yer car, or for 20 quid , would give u full designs , down to how many screws, where they need to be , so u could do it yer self. he also did some house speakers , which wasnt cheap and his...

i find the meguires stuff wax wise , if u apply it once u get a really nice finish, and u can tell its been done the autoglym i use as a quick go , if i dont have much time , if u use it once a week or more u start to notice it , only other alternative is to use a few layers of it

last stuff i got was Buffy Vampire Slayer Angel Simpsons Red Dwarf South Park x files had a few other just get all episodes then watch and delete. apart from that just general albums , get bored of em easily though

thats mine on blue yonder but upto 1200ksec is possible from blueyonders servers, 36k is max upload though :(

i thought u lived near me , cos i got blueyonder / cable but best way to find out how isps are going is to find a review site , at work we got the bt 4mb one that aint bad , and were suposidly getting upgrade to 8mb shortly

ye phone yer network up , or what ever network the fone was bought on , quote the imei , say its yer fone as u have the reiciept , and ask who black listed it. if it turns out to be the person you bought it off , report him .

i wud imagine all the fitters keep the job lot in stock its only a mk2 2 screen with uv protection or somet. unless its a cup then u can fit a normal one or one without uv pretection as its slighltly lighter, but only reason its diff is cos it doesnt have leather

ye he knows is stuff when it comes down to custom box designs, shame he left it to do other things.

yer daz i have to admit for photo`s etc epson ink is spot on , on that printer works out around 30-35p a page on decent quality. we have one at work its great, just a shame when u use non epson cartridges the colour n drops slightly. also the epson cartridge ink doesnt fade after time ...

that epson daz sugested + http://svp.co.uk/products-solo.php?pid=1372 or http://svp.co.uk/products-solo.php?pid=1171 then u got very cheap printing options :)

epson if its a inkjet

http://www.hillpower.co.uk/images/photo/172%20spot%20ind.jpg

http://www.cctvdealers.com/customer/intsys/File/AJPPlayer(1.0.11.05).exe havent tried it but thats the link i got for one.

i`ve allways prefered maxtor drives , but then again i just get internal ones , i gues u could add a external housing to one , but ive had no experiences with macs got 4 or 5 maxtors and there all going well some are 3-4 years old now

yes but some ppl do sign up to some sh*t most ive had was around 2000 in one go from same email addy on 1st apr

slly question but have u tried it without all the amps on just one capaciter, basically dont use it and try it.

a standard 225 with a remap is 268 ish , but with some extra work should see better gains