Search results

As above on ebay http://shop.ebay.co.uk/melonplec/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

Im sure this will be a repost from quite a while ago but anyway it sounds awesome.

I think its the dephaser pulley mate , but you'd be best to take it to Fred at Btm or Im sure that Ren-tech are very close to you ?

Thankyou Fred and Dink

Can anyone recomend the correct gauge , thickness and brand of cable ? cheers

gearbox sits on the left when looking at the rear of the car , are you sure its not a faulty damper ?

Is it safe to remove the black adjusting mounts and allow the spring to sit on the threaded mount instead ? thanks

Wow

Edited.

As above please take a look http://shop.ebay.co.uk/melonplec/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

ok thankyou

Definately no way of doing this then ?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250843169381&ssPageName=STRK:MESELX:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250843165600&ssPageName=STRK:MESELX:IT no reserve on these two

ok thanks nick

Anything that looks majorly wrong with the itb set up or general engine conditions that you can see from the photos ? cheers

1.4 is 2 inch and 2.0 is 2.25 or 2.5 inch bore i think

anyone know what this is worth roughtly ? 3k ?

Will this be ok ? , as i want to use my coilovers and my brembo 4 pots from my non sport on my sport thanks

Its ITB's mate and no its not worth it

right ive tried bridging the the two relay terminals this did not make the car start , i check all the fuses inside the car and in the engine bay these are all fine , ive checked all earths and the majority of the wiring , so im putting this down to a bad engine loom ? im guessing where all...

hi mick , ill give this a go tonight after work , mines a ph2 and doesnt have the inertia switch thanks for the info

no i dont ill buy a new set of relays today and give that a go but i still dont think it will solve it

i just went out and tried a few other relays still no voltage at either , is there any other fuses or anything else that could be causing this ? thanks

just went out to give it a try and its still not priming , the light under the fuel warning light is on the one that looks like a heartbeat , no power at the coil or the fuel pump , ive got no idea what else could be wrong ?

ok ill give that ago cheers

Hi everyone ive had quite alot of problems trying to get my f4r engine non sport to start , it cranks fine but on ignition the fuel pump wont prime , i tested to see if i can get 12v at the fuel pump and coil pack and it doesnt seem to be getting power at either , so im putting it down to...

???

anyone ?

My fuel pump isnt priming on ignition , ive ran a direct feed to the pump and wired in two different plug ends so ive ruled out pump faults and plug faults , which relay is for the fuel pump ?

Engine cranks over now even though the starter i bought from budgie of here doesnt want to disengage from the flywheel , now the fuel pump wont prime there's no immobiliser light on , there's no problem with pump as i put a direct feed to it and it pumped fine , so im guessing its either a...