Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
ive finnally finished fitting my lowering springs..... i did it on my own :S without any help at all and i thought i would show you guys what you think its 60mm lower now....... but im hoping the front drops slightly more do springs need time to bed in and drop or is this how they will look for...
erm the 1.2 to my knowledge was around 60-65bhp mate doubt its got anything more..... but you can still have fun round corners in it if you get some decent suspension
i got one of the strut brace nuts off eassy but on the other side drivers side its jammed tight i but a bit off wd40 on it but still no give tried putting an allen key on and everything but no joy can anyone give me a bit off advice on what to do and loosen it please
right next problem my rear springs are on and all sexy lol and low ive managed to loosen up the front right shock in the engine bay but i cant loosen up the from left i have tried with an allen key and i long socket set but it just aint budgin sorry about all the questions guys
and i have change the rear one and its sitting inbetween the two rubber things with the shock completly done up but they are still abit slack is that ok do they just tighten up when you drop the car back down? o and one other question what what do you turn the rear right hand bolt holding the...
i got my earth by taking the rear light out. if you unscrew the little black thing and then just get a flat screw drive scrape away the layer of paint there it dont need to be neat as you will never see it!! clip the earth on to the little black thing and screw it back in place job dont one...
hey guys my 60mm lowerings springs just turned up and it started raining so im fitting them tomorrow is there anything that i need to make sure i do i got the fubar guide which looks like its very useful but you guys got any little pointers that might make it easier?? shall i start at the front...
now i belive your name is fred if it aint then sorry dude... but i read i post you made early this week saying you sell parts for lower model clios what sort of stuff you do coz im looking on the website but can only see the 2.0l and v6 options
hang on a minute i didnt know you sold stuff for the cra* 1.2 8v base model lol what sort of stuff you do i looked on your website but it on has the v6 and sport options!!
sorry to be a bit rude but the police dont give a to** about tinted rear lights on a clio for 2 reason it still really shows and you have the brake light on the roof/ top of windscreen these are mine had them on the car for just under a year never been pulled and i drive in london all the time...
its a dvd single din unit so its got a few more cables than usual and one other thing the big thick black wire on its own (which i think is th problem does that have to be connected?
now i have tried and tried and tried for over 2 hours to fit this damn head unit in place and all i need is for it to drop in another 2 inchs is there anyways i can get to the back the the head unit by taking dash off to move them around like that ......any one got any tips
www.k-tecracing.com/www.yozzasport.co.uk/
there is 2 i know i get my stuff from k tec coz i aint got a 1.2 not got a good enough car for yozzasport yet ha ha
now i posted two messages in quick sucsection about the same problem i was wiring in my new head unit and all was ok it had power and was working. then it stopped and so did my imboliser light that stopped coming on and i was able to start my car up the moment the key was in the ignition. (5...
i have a blown fuse and as i said in my previous thread my immboliser light is not coming on and i can fire my car up all the time i have tried my new head unit in my car plus my old on and original renault one and none of them are getting any power would it fix all this if i change the fuse i...
hey i was fitting my new head unit turned everything off bolted it all in place ....i checked it worked before i did all this and it did and then once i had bolted it in place all of a sudden the head unit had no power going to it and the immobiliser light was not lighting up not even flashing...
hey guys im really worried im fitting my new dvd head unit and it was all going ok and then a bolted it in place i had it work alreayd by this point turned my engine off bolted head unit in place and now the imboliser light is not flicking like it used to and my head unit not working at all...
hey guys need urgent advice i just bought a monitour/dvd player single din unit and its got so many cables im struggling to get them all in do you think i should take the dash off and do it that way or whats the way around it been playing for like 40mins to get it in now and no joy??? please help
yeah i was more bother by the fact that i have a savage back box whihc sits low as it is i think it works out it will be about 12cmoff the ground which is quite low but i have bought them now just need alloys lol im lower 60mm with steelies gonna look so stupid for 3 weeks or 4 lol
well i showed be recieving my springs from k tec sometime this week hopefully i ordered them earlier today so i hope i get paid enough and someone is selling there standard clio alloys the only other ones i like are the team dynamics 1.2 race things and they are silly money
what size are the clio sport ones there are the five spoke ones and the turinos aint there?? not sure of the names soz lol all i know is i want a set for a maximum of £150 coz i wanna get some proxxes r888