Search results

Of course! Although that isn't mine it's Rhys Beals, just letting me borrow it;)

Heres mine, Negative battery terminal moved under the filter now tho:)

Thats not bad Dan! Think I'm just going to take it to garage near Rhys, as if they have done my car I'm sure they can do mine! Plus I even think they use a pit lol:)

Ok awesome thanks, didn't go to plan anyway, couldn't even get my car on the ramp! And it's not even silly low. Plan b is suppose:/

Dont say that Dan! I just bought 20mm FK spacers and I'm sure we have the same alloys and roughly the same height! Rubbing'ell!

5mm Spacers are fine on standard bolts, think people say aslong as about 5 threards go onto the hub it should be all good. Take the wheel off and put the spacer onto the back of the wheel and see how much thread you have coming through on the bolts.

Mine are 16" tony but thanks, im sure we will sort it with 0.2 degree. Would a 5mm spacer on the rear make a differance:/?

Cheers guys! You got a point Chip went to a garage the other day and they didn't know either:/ So thought I'd try these lol. Will let you know how I get on:)

Hi all, Need my alligment done and I want 12mins toe out, rang up local tyre place and asked if they could do that but they said there machine only measures in degrees. So my maths works out that 12mins is 0.2degrees? If someone could confirm that would be great as its booked in for 5pm. Cheers

BIGDEAL31 was 31% off and yeah lemforder ones are good!

Just bought these, now gone down to £55! Bargain.

With the 31% from ECP I think they work out at £27 a pair.

Lemforder ones is what everyone uses, get them from Euro Car Parts and if you use Promo code BIGDEAL31 you'll get 31% off:)

Found these while searching for spacers, seem to be the cheapest place to sell them! Im sure the part number match up with FK website apart from they have a -19 on the end and Amazon's part number doesn't. http://www.amazon.co.uk/gp/product/B004CY5DMK/?tag=cliospnet01-21 £15 cheaper than else...

Well there fitted! Went over to Rhys Beals on Friday night to fit the front coilovers, along with pure Motorsport topmounts, fresh ball joints and track rod ends, sort out the ride height and then adjust the camber. Started with the passenger side track rod end and ball joints and what a pain...

Yeah I'm going to look into replacing mine! Don't see how you can have the front so low and only slightly rub!

Looks awesome mate! I haven't had a problem with mine tbh apart from rubbing which is my own fault and my exhaust hitting on the axle when going over speed bumps!

If you get them from eBay mate you can get the hero2 Motorsport for around £200.

Yeah I'm not sure what mine is, hope to get it on a RR one day when Danny or the EOE section arrange one:) Doesnt really bother me the figure as it feels good to me:) I would like to do some engine mods but there's not much you can do until you start going silly! I still run the standard cat...

Not that bothered tbh mate, weather it looses 1bhp or gains 3 lol, the sound is just worth it IMO! Cheers man, and yes it is a bit, weight saving! ;)

Awesome! Cheers mate. Ill spray the rears this afternoon before my drive home from work and see if that fixes it:)

I havent fitted them all yet mate, done the rears the other night and said in my Progress thread how good they felt, and they serouisly do! Feel so much more planted on the ground and less twitchy at the back when breaking etc than before. But then again I could of proberly done with new shocks...

On mine the adjuster are also on the bottom of the shocks. Iv just been playing around with my fronts and fitting the top mounts into them. This is how I have done it; It goes SPAX Spring (obviously), SPAX top collet, pure spacer, pure top mount, then finally the pure Motorsport nut which...

Sorry bit confiused here, how can it be what your original Renault bearing sat on and be a spax part?

Looks good to me, not sure what that plate is between the top mount and spring hat is? Pretty sure I don't have that:/

I think it's only hubcentric after 15mm? Could be wrong tho!

Well I went over to Rhys last night to fit the rears which tbh we done fairly quick! We didn't set them two low as the front is still on sportlines but it certainly lower than what it was with sportlines on the rear! So I'm a happy bunny! We then went for a little drive, mainly to hear the...

I don't think they have many reviews mate, but the cheaper kit is not dampening adjustable iirc? KW variant 2's are rated hhighly on here tho.

Popping over to Rhys tonight to fit the rears, I felt bad going over after I heard the bad news but he said its fine and we can start ripping his to bits after. So I'll update later with some pictures of the rear later;) cannot wait to get that arse down!

Cannot wait to fit mine! They came on Friday after being told it would be around a months wait, but they turn't up to my suprise after two weeks. I'v got sportlines and an ARB at the moment and thats a nice set up. I'm fitting the rears tonight with Rhys Beal then move onto the fronts at the...