Search results

Beanie is just off the m1 in Milton Keynes

Airbox? Intriguing, I was looking at getting a carbon Reverie air box ? What have you got?

Decided I’m going to start from the rear of the car to fit these brake lines. Finally got some new bolts for the rear calipers to stub axle. Whilst it was too late I decide to get the drivers front hose to fitted with out rubbing and cut a little piece of metal out. Need to drill through...

Nah all straight fittings ??‍♂️

Oh make sense. It’ll look good with a centre exhaust ??

I wondered why my bias valve was back to front ??‍♂️ My ocd is telling me order another one.

That box ?

I’ve driven the same clio cup with hard lines and then with braided, and both were fine to me tbh, all personal preference. I only went this way for easy and time saving which isn’t currently working lol.

It was your set up I was copying tbf as I knew you had the grommet kit I presumed it would be a bit longer. I possibly gunna have to drill a hole in the bulk head to pass the 90 degree connector through and make a L shape bracket riveted to the bulk head, with a hole in to tighten the bulk head...

Started to look at where the brake lines will run inside the car today. It seems the lines before and after the brake bias valve are to long. Well at least one of them is to get them to run neatly. This might just be me being a bit OCD but running how I’d like the T piece is in the spare wheel...

I know JC weld fab do a fab job but couldn’t you save time and buy a PMS exhaust? Well built light and pretty quiet on the DB reader? Also I’ll be keen to know how you get on at Northampton Motorsport. I’m looking for somewhere close to map mine. Scoff at EFi has always done an amazing job but...

@robzracing where did you get the round aluminium sheet you mounted your swirl pot on?

Yeah your right. I’ve spent an hour every morning last week messing with the position. It’s fairly central yeah, loads better than the seating position in my old blue cup shell with standard rails and seat subframes. If I was to weld my own rails in I’d probably do them a tad lower tho but...

So after many hours and many different types of side mounts my seat is finally in. Needs final tightening but it’s in and out the way. Was a lot of messing about as was working around welded in seat rails suited to a different seat and my side mounts. Now that’s in I can work out where the...

@Jon-r87 check the race car/track car section. First thread ??

It’s rolling ?

There the same dimension as the 172/182 discs but like Mark says the bearing is bigger so better reliability. Thanks Mark, I was hoping that was the case it’s all bolted up nicely lol.

Rear beam is back on. Fitted the PMS stub axle kit, couldn’t fit the calipers as need need bolts. Anyone else fitted the kit? I just fired the kit on and thought afterwards there wasn’t the little spacer that sits behind the disc in the kit. Do the twingo discs use the spacer or does the...

Did you change the arb bushes with the subframe off? If so how ? I tried fitting black series yesterday and now only have 1 bush as the other is about 6 gardens up my street ??

Looks awesome bud ?? Glad to see it’s coming along nicely. What inner arb bushes are you running?

New toy sent dremel exploded ?

Yeah just about. I thought about facing the shock the other way but seems fine. Tight but doable.

So my PMS rear beam is nearly on, just waiting on new bolts to mount it to the chassis and then can add the PMS shims, spacers, billet stub axles, twingo rear discs and new calipers. I’m trying to get this shell rolling as soon as possible which made sense to remove the subframe next ??‍♂️

I’ve not actually looked as the brake discs didn’t fall off, so I’m guessing it’s a standard beam rather than a separate hub bearing and normal disc like the cup racers ran

@Nathan Evans and @Hazza462 are probably your best shout. Look at their project threads ??

I’m looking at running braided fuel and brake lines inside the car. The normal route seems to run them down the side of the exhaust tunnel. My shell doesn’t have any exhaust heat shielding underneath, would anyone else be concerned about how hot the tunnel might get? Anyone else run without...

Not sure hope not ?

Dug out my new brake fluid reservoir

It’s Nick’s from Puremotorsport old carbon dash from his 172 time attack car.